New Silicons and Electronics

Quasi-resonant AC/DC converter that provides an optimum system for all products which has an electrical outlet. Quasi-resonant operation enables soft switching and helps to keep the EMI low. This IC can be designed easily because it includes the 1700 V/4 A SiC (Silicon-Carbide) MOSFET. Design with a high degree of flexibility is achieved with current detection resistors as external devices. The burst operation reduces an input power at light load. It includes various protection functions, such as soft start function, burst operation, over current limiter per cycle, over-voltage protection function, overload protection function. BM2SCQ121T-LB  BM2SCQ122T-LB, BM2SCQ123T-LB, BM2SCQ124T-LB Datasheet  https://www.rohm.com/datasheet/BM2SCQ123T-LB/bm2scq12xt-lb-e

Toshiba has launched three N-channel MOSFET products － that are suitable for lighting control switches of automotive headlamps and reverse voltage protection, and expanded the lineup. Products with three different voltages (30 V/60 V/100 V) are lined up to be able to support lighting patterns depending on the number of LEDs connected in series. By using the latest process , the products feature industry-leading  low On-resistance, helping to reduce the power consumption of devices. SSM6K809R and SSM6K810R are high ESD immunity products. The TSOP6F package can reduce footprint by about 70 % compared with SOP-8 package, contributing to making equipment smaller. Datasheet https://toshiba.semicon-storage.com/info/docget.jsp?did=65053&prodName=SSM6K818R https://toshiba.semicon-storage.com/info/docget.jsp?did=63953&prodName=SSM6K810R https://toshiba.semicon-storage.com/info/docget.jsp?did=63955&prodName=SSM6K809R for moew details https://toshiba.semicon-storag...

Toshiba has launched “TCK207AN,” a compact load switch IC with an increased strength package. The DFN4A package is a newly developed, compact mold resin package. Its higher strength package compared with the conventional WCSP makes it harder for the product to be damaged by contact or impact when or after being mounted on a board. In addition, its low On-resistance and low current consumption contribute to the lower power consumption of devices. Datasheet https://toshiba.semicon-storage.com/info/docget.jsp?did=63537&prodName=TCK207AN for more details https://toshiba.semicon-storage.com/ap-en/company/news/new-products-share/linear/linear-20190328-1d.html

Toshiba has launched a general rectifier diode "CRG04A" that is suitable for reverse polarity and reverse current protection in automotive ECUs  ( Electronic Control Unit ). The new product CRG04A features a maximum repetitive peak reverse current of 5 μA   by optimizing the chip structure, a 50 % reduction from the conventional product CRG04. This helps to reduce the power consumption of devices. Furthermore, realizing the average ESD protection at 25 kV   raises ESD protection when the connector is inserted and removed, contributing toward improving the reliability of devices. In addition, by using the highly versatile S-FLAT™ package, this product can replace conventional products. ESD protection ability: ESD=25 kV (typ.) Low repetitive peak reverse current: I RRM =5 µA (max) @V RRM =600 V Repetitive peak reverse voltage: V RRM =600 V Datasheet https://toshiba.semicon-storage.com/info/docget.jsp?did=65050&prodName=CRG04A https://toshiba.semicon-st...

Microchip introduced the space industry’s first Arm®-based microcontrollers (MCUs) that combine the low-cost and large ecosystem benefits of Commercial Off-the-Shelf (COTS) technology with space-qualified versions that have scalable levels of radiation performance. Based on the automotive-qualified SAMV71, the SAMV71Q21RT radiation-tolerant and SAMRH71 radiation-hardened MCUs implement the widely deployed Arm® Cortex®-M7 System on Chip (SoC), enabling more integration, cost reduction and higher performance in space systems. SAMV71Q21RT is the radiation tolerant version of the popular Microchip SAMV71Q21. This space-qualified version of the product adds:  Ceramic & hermetic package, extended temperature range -40C to 125C, extended qualification flow according to QML-V or QML-Q space grade flow.  Radiation performance for the SAMV71Q21RT:  SEL LET > 60 MeV.cm2/mg (at 125C), and TID up to 20 Krad (Si). SAMRH71 is the Radiation-Hardened-By-Design (RHBD) version of...

The MAX20049 is a dual step-down converter IC with two low-dropout regulators (LDOs), providing a single-chip solution for automotive cameras. The two step-down converters are designed for fixed-frequency PWM operation with input voltages from 5V to 17V for MAX20049 and 4V to 17V for MAX20049C. The dedicated high-voltage inputs allow for a flexible solution 16-Pin Side-Wettable (3mm x 3mm) TQFN with an Exposed Pad Wide 4V to 17V Input Voltage Range for Power- Over-Coax Cables Fixed Output-Voltage Options MAX20049ATEA/VY+, MAX20049ATEB/VY+, MAX20049ATEB/VY+, MAX20049ATEF/VY+, MAX20049ATEH/VY+, MAX20049CATEA/VY+ MAX20049EVKIT#   MAX20049 evaluation kit (EV kit) Datasheet https://datasheets.maximintegrated.com/en/ds/MAX20049.pdf For more details https://www.maximintegrated.com/en/products/power/switching-regulators/MAX20049.html/tb_tab0 https://www.maximintegrated.com/en/products/power/switching-regulators/MAX20049EVKIT.html/tb_tab0

The AP7345D is a Dual low dropout regulator with high output voltage accuracy, low RDSON, high PSRR, low output noise and low quiescent current. This regulator is based on a CMOS process. Each of regulators includes a voltage reference, error amplifier, current limit circuit and an enable input to turn on/ off output. With the integrated resistor network fixed output voltage versions can be delivered. Low VIN and Wide VIN Range: 1.7V to 5.25V Output Current: 300mA VOUT Fixed 1.2V to 3.6V X2-DFN1612-8 package Part Number Vout1/Vout2 AP7345D-1218RH4-7 1.2V/1.8V AP7345D-1528RH4-7 1.5V/2.8V AP7345D-1812RH4-7 1.8V/1.2V AP7345D-1815RH4-7 1.8V/1.5V AP7345D-1818RH4-7 1.8V/1.8V AP7345D-1828RH4-7 1.8V/2.8V AP7345D-1833RH4-7 1.8V/3.3V AP7345D-2518RH4-7 2.5V/1.8V AP7345D-2812RH4-7 2.8V/1.2V AP7345D-2818RH4-7 2.8V/1.8V AP7345D-2825RH4-7 2.8V/2.5V AP7345D-2833RH4-7 2.8V/3.3...

The AL5816Q is a 5-terminal adjustable constant current linear LED controller offering excellent temperature stability and current capability. The AL5816Q can work with a wide input voltage range from 4.5V to 60V. With its low 200mV current sense FB voltage, it controls the regulation of LED current with minimum power dissipation compared with traditional linear LED drivers. This makes it ideal for medium to high current LEDs Qualified to AEC-Q100 Grade 1 Wide Input Voltage Range from 4.5V to 60V PWM Dimming Capable Up to 15mA Driver Capability for Bipolar Transistor SOT25 5Pin Case style Datasheet AL5816QW5-7 .pdf https://www.diodes.com/assets/Datasheets/AL5816Q.pdf https://www.diodes.com/products/power-management/led-drivers/linear-led-drivers/part/AL5816Q

The PI7C1401 is an I²Cbus/SPI quad port expander, it is specifically designed to manage common port types such as SFP+ and QSFP+. The PI7C1401 provides an I²Cbus/SPI interface, an interrupt output to host and four I²C interfaces, general purpose pins for low-speed control signals to the modules. The PI7C1401 can be used in a wide range of applications such as networking, telecom, storage/data center, and embedded systems. The typical usage for this device is high volume applications requiring an "expander" to aggregate all low-speed control and I²C signals across four ports and presents a single I²C or SPI interface to host. Multiple PI7C1401s can be used in high-port-count applications with one I²C or SPI to host. The system BOM cost can be cut by using smaller IO count control device (FPGAs, CPLDs, MCUs) and by reducing routing layer congestion. PI7C1401AZFEX TQFN-56 IC PI7C1401AEVB Evaluation Board For more details please check below links https://www.diodes.com/a...

The LTC4124 is a simple high performance wireless Li-Ion charger with low battery disconnect. The pinselectable charge current (up to 100mA) and charge voltage ensure versatility while minimizing the number of required external components. Complete Wireless Power Receiver, Li-Ion Charger and PowerPath™ Controller Wireless Input Power Control and Rectification Pin-Selectable Charge Current: 10mA/25mA/50mA/100mA Pin-Selectable Charge Voltage: 4.0V/4.1V/4.2V/4.35V Pin-Selectable Low Battery Disconnect: 2.7V/3.2V Small Thermally Enhanced 12-lead 2mm × 2mm LQFN NTC Input for Temperature Qualified Charging for more details https://www.analog.com/en/products/ltc4124.html#product-overview Datasheet LTC4124EV#TRPBF, LTC4124EV#TRMPBF https://www.analog.com/media/en/technical-documentation/data-sheets/LTC4124.pdf

Allegro MicroSystems, has announced the release of the APS11450 and APS12450, adding two Hall-effect sensor ICs to its growing portfolio of solutions for systems that require functional safety. The APS11450 is a family of unipolar switch ICs, while the APS12450 devices are bipolar latches. They are pin-compatible upgrades for existing three-wire Hall switch and latch ICs developed in accordance with ISO 26262:2011 with ASIL-B capability (pending assessment). These magnetic sensors have  integrated self-test features that are always active in the background while the system is running, leading to very short fault detection times. This action is automatic, and the tests are executed so quickly (25µs, typical) as to be transparent to host system—even in the case of latches used in high-speed motors and encoders. The unique voltage-mode output communicates the sensor’s status (including the safe state), while remaining backward compatible with logic-level interfaces, application cir...

EFR32xG21 Wireless Mesh Starter Kit SLWSTK6006A https://www.silabs.com/products/development-tools/wireless/efr32xg21-wireless-starter-kit The EFR32xG21Wireless Start Kit supports Bluetooth, Zigbee, Thread and Multiprotocol Zigbee/Bluetooth software stacks. Our software provides one-click access to design tools, documentation, software and support resources for Wireless Modules and SoCs using Bluetooth. Get up and running quickly with precompiled demos, application notes and examples. Use advanced tools including energy profiling and network analysis to optimize your wireless systems. SLWSTK6006A EFR32xG21Wireless Start Kit EFR32xG21 2.4GHz +20 dBm Radio Board SLWRB4180A The Wireless Gecko SLWRB4180A wireless radio board plugs into the Main Board provided with the  Wireless Gecko Starter Kit . The starter kit includes access to Zigbee® and Thread software stacks. The modular design supports different radio boards, enabling developers to develop Zig...

Summary of RGS60TS65HR Low Collector - Emitter Saturation Voltage Short Circuit Withstand Time 8μs Qualified to AEC-Q101 650V Collector - Emitter Voltage 30A Collector Current 223W Power Dissipation Datsheet link RGS60TS65HRC11.pdf https://www.rohm.com/datasheet/RGS60TS65HR/rgs60ts65hr-e

Summary of RGTVX6TS65D Low Collector - Emitter Saturation Voltage High Speed Switching & Low Switching Loss Short Circuit Withstand Time 2μs Built in Very Fast & Soft Recovery FRD 650V Collector - Emitter Voltage 80A Collector Current 404W Power Dissipation Datsheet link RGTVX6TS65DGC11.pdf https://www.rohm.com/datasheet/RGTVX6TS65D/rgtvx6ts65d-e

The MAX20336 ultra-small, low-on-resistance (RON) double-pole/single throw (DPST) analog switches feature Beyond-the-Rails™ capability that allows signals from -5.5V to +5.5V to pass without distortion, even when the power supply is below the signal range. The low onresistance (0.19Ω) also makes the devices ideal for lowdistortion switching applications, such as audio or video. Low Supply Current 65μA (Typ) at 1.6V On-Resistance 0.19Ω (Typ) +1.6V to +5.5V Single-Supply Range ESD Protection ±30kV Human Body Model 6-Bump WLP (1.308mm x 0.828mm) -40°C to +85°C Operating Temperature Range MAX20336EVKIT#  Evaluation Kit The MAX20336 evaluation kit (EV kit) https://datasheets.maximintegrated.com/en/ds/MAX20336EVKIT.pdfis a fully assembled and tested circuit board that demonstrates the MAX20336 beyond-the-rails DPST analog switches. EV Kit Contents : EV Kit Board Containing a MAX20336 IC Part MAX20336ENT+, MAX20336ENT+T, MAX20336AEFT+*, MAX20336AEFT+T* * Denotes a future p...

The MAX31342 low-current, real-time clock (RTC) is a time-keeping device that provides an extremely low timekeeping current, permitting longer life from a power supply. The MAX31342 supports 6pF high-ESR crystals, which broaden the pool of usable crystals for the devices. This device is accessed through an I2C serial interface. An integrated power-on reset function ensures deterministic default register status upon power-up. Increases Battery Life: 150nA Timekeeping Current Provides Flexible Configurability SMD 1mm x 2mm, 8-Bump WLP with 0.5mm Pitch +1.6V to +3.6V Operating Voltage Range MAX31342SHLD# SHIELD Board The MAX31342 shield is a fully assembled and tested PCB to evaluate the MAX31342, low-current, real-time clock (RTC) with I2C interface. The shield operates from a single supply, either from USB or external power supply, and the onboard crystal provides a 32.768kHz clock signal. This device is accessed through an I2C serial interface. The MAX31342 shield provides...

The DS28E84 is a radiation-resistant secure authenticator that provides a core set of cryptographic tools derived from integrated asymmetric (ECC-P256) and symmetric (SHA-256) security functions. In addition to the security services provided by the hardware implemented crypto engines, the device integrates a FIPS-compatible true random number generator (TRNG), 10Kb of secured OTP, 15Kb of FRAM, one configurable GPIO, and a unique 64-bit ROM identification number (ROM ID). Operating Range: 3.3V ±10%, 0°C to +50°C ±8kV HBM ESD Protection of 1-Wire IO Pin 6-Pin, 3mm x 3mm TDFN Advanced 1-Wire Protocol Minimizes Interface to Just Single Contact Unique and Unalterable Factory Programmed 64-Bit Identification Number (ROM ID) SHA-256 OTP (One-Time Pad) Encrypted R/W of Configurable Memory Through ECDH Established Key ECC-P256 Compute Engine DS28E84EVKIT# The DS28E84 evaluation system (EV system) provides the hardware and software necessary to exercise the features of the DS28E8...

The KITPF8100FRDMEVM and KITPF8200FRDMEVM are a customer evaluation boards featuring the PF8100 and PF8200 power management IC. The kits integrates all hardware needed to fully evaluate the featured power management integrated circuit. It integrate a communication bridge based on the FRDM-KL25Z freedom board to interface with the FlexGUI software interface to fully configure and control the PF8100/ PF8200 PMIC. PF8100/PF8200 Evaluation Boards Kit Contains 1. Assembled and tested KITPF8100FRDMEVM and KITPF8200FRDMEVM, and preprogrammed FRDM-KL25Z microcontroller board in an anti-static bag 2. 3.0ft. USB-STD A to USB-B-mini cable 4. USB to mini USB cable 5. Quick Start Guide Supported Devices: PF8100_PF8200: Power Management Integrated Circuit (PMIC) for high-performance processing applications For more details https://www.nxp.com/support/developer-resources/evaluation-and-development-boards/analog-toolbox/pf8100-pf8200-customer-evaluation-boards:PF8100-PF820...

Toshiba   has launched a lineup of 31 single power supply one-gate logic devices that support low voltage operation. The new “7UL1G series,” suitable for down translation to 0.9V, and “7UL1T series,” for up translation from 1.8V to 3.3V, allow users to more easily [1]  design voltage-level translation used for data communication control on devices with multiple power supply systems. Volume production and shipments start today. The 7UL1G series support down translation to 0.9V, and the 7UL1T series support up translation from 1.8V to 3.3V, realizing simplified logic-level and voltage-level translation in multiple power supply systems. 7UL1G series devices operate with a 0.9V to 3.6V power supply, and their input terminals are 3.6V-tolerant. When used with a 0.9V power supply, down translation to 0.9V combined with logic-level translation of 0.9V to 3.6V input signals can be provided by a single device. 7UL1T series devices operate with a power supply of 2.3V to 3.6V, a...

Toshiba Electronics Europe GmbH has announced the launch of a new adapter for unidirectional optical modules. It is particularly valuable in industrial systems such as power storage systems and high voltage inverters.  The new TOCA1300 allows a fiber optic transmitting module (such as Toshiba’s TOTX1350(F)) to be connected directly to a compatible fiber optic receiving module (e.g. TORX1350A(F) or TORX1355(F)), thereby allowing the transmission of data across short distances. Adapter for simplex optical modules  for more details https://toshiba.semicon-storage.com/eu/company/news/2019/03/opto-20190326-1.html Datasheet link  TOCA1300.pdf https://toshiba.semicon-storage.com/info/docget.jsp?did=61069&prodName=TOCA1300

Toshiba launched two new series of small surface mount LDO regulators for application in the power supply of mobile devices, imaging and audio-visual products. The 40 regulators in the TCR5BM series support a dropout voltage (VDO) as low as 100mV and a maximum output current of 500mA, while 40 additional devices in the TCR8BM series extend options with a 170mV VDO and 800mA output current. The TCR5BM and TCR8BM series are both available with VOUT options in the range 0.8V to 3.6V. The TCR8BM series are CMOS single-output voltage regulators with an on/off control input, featuring ultra low dropout voltage, high PSRR, low inrush current and fast load transient response. These voltage regulators are available in fixed output voltages between 0.8 V and 3.6 V, and capable of driving up to 800 mA. The TCR8BM series are offered in the ultra small plastic mold package DFN5B (1.2 mm x 1.2 mm; t 0.38 mm). A differentiating feature is the use of a secondary bias rail as a reference voltage t...

Toshiba launched two new series of small surface mount LDO regulators for application in the power supply of mobile devices, imaging and audio-visual products. The 40 regulators in the TCR5BM series support a dropout voltage (V DO ) as low as 100mV and a maximum output current of 500mA, while 40 additional devices in the TCR8BM series extend options with a 170mV V DO  and 800mA output current. The TCR5BM and TCR8BM series are both available with VOUT options in the range 0.8V to 3.6V. The TCR5BM series are CMOS single-output voltage regulators with an on/off control input, featuring ultra low dropout voltage, high PSRR, low inrush current and fast load transient response. These voltage regulators are available in fixed output voltages between 0.8 V and 3.6 V, and capable of driving up to 500 mA The TCR5BM series are offered in the ultra small plastic mold package DFN5B (1.2 mm x 1.2 mm; t 0.38 mm). for more details https://toshiba.semicon-storage.com/eu/company/news/2019/03...

Toshiba Electronics Europe GmbH has started sample shipments of an automotive DC motor driver IC with a LIN (Local Interconnect Network) slave function that can communicate with a LIN 2.0 master IC for in-vehicle networks. The new TB9058FNG is suitable for many applications requiring up to 0.3A drive current using LIN BUS including heating, ventilation and air conditioning (HVAC) damper control drivers. One significant advantage of the new driver is that no software development is required, as the IC incorporates the hardware logic of a single-channel H-bridge motor driver and LIN communication function with an enhanced checksum. The integration of the enhanced checksum function allows the LIN 1.3 compliant TB9058FNG to communicate with a LIN 2.0 compliant master IC.  The TB9058FNG receives the position data from the motor rotation target via the external LIN BUS, and drives the motor to the rotation target. A variety of communication rates up to 19,200 bps are easily selected in ...

THVD1419 and THVD1429 are half-duplex RS-485 transceivers with integrated surge protection. Surge protection is achieved by integrating transient voltage suppressor (TVS) diodes in the standard 8-pin SOIC (D) package. This feature provides a substantial increase in reliability for better immunity to noise transients coupled to the data cable, eliminating the need for external protection components. Part list : THVD1419DR, THVD1419DT, THVD1429DR, THVD1429DT Summary: Meets or Exceeds the Requirements of the TIA/EIA-485A Standard 3 V to 5.5 V Supply Voltage Temperature Range: -40°C to 125°C HVD1419: 250 kbps, THVD1429: 20 Mbps Industry Standard 8-Pin SOIC package Source:  http://www.ti.com/product/THVD1419 Datasheet:  http://www.ti.com/lit/ds/symlink/thvd1419.pdf

The TLV61048 is a non-synchronous boost converter that provides a power-supply solution for products powered by a low-voltage supercapacitor and a single-cell Li-ion battery. The TLV61048 integrates a power switch with 4.7-A typical current limit to extend the discharge capability of the input source without sacrificing maximal load delivery. TLV61048 also allows the use of smaller, wide-range external inductor and output capacitor to ease design efforts. The TLV61048 operates with a selectable switching frequency of 600 kHz or 1 MHz by configuring the FREQ pin. At the light load, the device enters into the PFM operation to achieve higher efficiency. The TLV61048 has built-in 2-ms soft start to minimize the inrush current. Input voltage 2.61 V to 5.5V  Output voltage up to 15V  4.7-A (Typical) switch current limit  SOT-23 package Source :  http://www.ti.com/product/TLV61048 Datasheet: http://www.ti.com/lit/ds/symlink/tlv61048.pdf

The MKR Motor Carrier is an MKR add-on board designed to control servo, DC, and stepper motors. The Carrier can also be used to connect other actuators and sensors via a series of 3-pin male headers. for more details please click this link   https://store.arduino.cc/usa/mkr-motor-carrier ASX00003 MKR Motor Carrier The summary of features is shown below: 1.       Compatible with all the boards in the MKR family 2.       Four servo motor outputs 3.       Four DC motor outputs (two high performance + two standard performance) 4.       Sensing of current feedback for the high-performance motors 5.       Two inputs for encoder sensors 6.       Four inputs for analog sensors (3-pin compatible) 7.       Possibility to read the status of the batteries 8.       ON...

ZGM130S - SIP Module: The Silicon Labs Z-Wave 700 Zen Gecko SiP Module, ZGM130S, is a fully integrated Z-Wave module, enabling rapid development of Z-Wave solutions. A baseband controller, Sub-GHz radio transceiver, crystal, decoupling, and matching is included to provide a complete Z-Wave System-in-Package module requiring only an external antenna. An ideal solution for smart home control and sensing applications such as sensors, door locks, light switches, security networks as well as gateways. ZGM130S037HGN1 ---> Tray packing ZGM130S037HGN1R ---> Tray  Tape & Reel packing Source : https://www.silabs.com/products/development-tools/wireless/mesh-networking/z-wave/z-wave-700-hardware Datasheet:  https://th.mouser.com/datasheet/2/368/Silicon_Laboratories_02072019_ZGM130S-1531105.pdf

The Z-Wave 700 Zen Gecko Wireless Starter Kit includes the Z-Wave software stack, sample code and integrated debug adapter. A single world-wide development kit for both end devices and gateways with multiple radio boards enable developers to create a mesh network and evaluate the Z-Wave 700 module. With the supporting Simplicity Studio suite of tools, developers can accelerate their wireless application development; mesh networking debug and Z-Wave protocol sniffer tools for analysis; and visual energy profiling and optimization. The Z-Wave 700 SDK is downloaded through Simplicity Studio. In Simplicity Studio, developers can access all documentation, developer guides and much more SLWSTK6050A Z-Wave 700 Wireless Starter Kit ZGM130S - SIP Module: The Silicon Labs Z-Wave 700 Zen Gecko SiP Module, ZGM130S, is a fully integrated Z-Wave module, enabling rapid development of Z-Wave solutions. A baseband controller, Sub-GHz radio transceiver, crystal, decoupling, and matching is in...

Sleek, light and lightning-fast, the Micron 2200 PCIe NVMe™ SSD is revolutionizing computing on the go. The Micron 2200 delivers our first client NVMe SSD, ideal for intense computing workloads. The 2200 is fully architected by Micron using 3D TLC NAND technology for cost and power efficiencies. MTFDHBA256TCK-1AS15ABYY MTFDHBA512TCK-1AS15ABYY MTFDHBA1T0TCK-1AT15ABYY Available in a streamlined M.2 form factor, the Micron 2200 SSD enables high performance in the 256GB “sweet spot” and capacities up to 1TB. Its 64-layer TLC 3D NAND architecture, PCIe interface and NVMe protocols enable low latency and high bandwidth with a strong price-to-performance ratio. Protect your data with the Micron 2200’s secure firmware and AES XTS-256-bit encryption with Opal 2.0 standards for self-encryption. Source https://www.micron.com/products/solid-state-drives/product-lines/2200 https://www.micron.com/-/media/client/global/documents/products/product-flyer/2200_pcie_nvme_ssd_product_brief.pdf?l...

The Broadcom BCM8988x is a 100BASE-T1/1000BASE-T1 Ethernet transceiver device designed for automotive applications including in-vehicle connectivity, infotainment, ADAS and smart mobility. The device performs all the physical layer (PHY) functions for 100BASE-T1 and 1000BASE-T1 encoded Ethernet packets over a single pair of unshielded twisted-pair (UTP) cables. The BCM8988x is designed to meet automotive specifications for EMI/EMC, noise cancellation, and transmission jitter, providing consistent and reliable operation over a single unshielded twisted-pair automotive cable. Source: https://www.broadcom.com/products/ethernet-connectivity/automotive/bcm8988x

Broadcom launched the BCM8956X, a family of automotive multilayer Ethernet switches, designed to address the growing need for bandwidth, flexibility, security and time-sensitive networking (TSN) for autonomous and connected vehicles. In addition, Broadcom has begun shipping production quantities of its automotive 1000BASE-T1 PHY transceiver device, the BCM8988X, enabling automotive OEMs to immediately deploy Gigabit Ethernet on single-pair UTP cables for in-car networking applications. The BCM8956X includes highly-optimized switches in various port configurations with integrated 100BASE-T1 and 1000BASE-T1 PHYs, allowing customers to have scalable and cost-effective designs for automotive gateway, ADAS and infotainment applications. The integrated PCIe interface provides high bandwidth connectivity to the host processor, while the on-chip Layer 3 flow accelerator offloads the host processor from compute intensive routing operations. Furthermore, the BCM8956X is packed with advance...

Optimized for best conduction and switching performance in soft-switching circuits, STMicroelectronics’ STGWA40IH65DF and STGWA50IH65DF 650V STPOWER™ IGBTs increase the energy efficiency of resonant converters in the 16kHz-60kHz switching-frequency range. Rated for 40A and 50A respectively, the STGWA40IH65DF and STGWA50IH65DF serve applications up to 4kW. With low saturation voltage (VCE(sat)) of 1.5V (typical at nominal current) and a low-drop voltage freewheeling co-packaged diode, these advanced IGBTs combine outstanding conduction performance with low turn-off losses of just 0.19mJ (typical) in the 40A STGWA40IH65DF. The STGWA40IH65DF and STGWA50IH65DF IGBTs are available now in the TO-247 long-lead power package. ST will add 20A and 30A variants soon, in TO-247 long lead and TO-220 packages. Source: https://www.st.com/b/content/st_com/en/about/media-center/press-item.html/n4147.html https://www.st.com/resource/en/datasheet/stgwa50ih65df.pdf https://www.st.com/resource/e...

ROHM has recently announced the addition of 10 new automotive-grade SiC MOSFETs. The introduction of the SCT3xxxxxHR series allows ROHM to offer the industry's largest lineup of AEC-Q101 qualified SiC MOSFETs that provide the high reliability necessary for automotive on board chargers and DC/DC converters. SCT3017ALHR, SCT3022ALHR, SCT3030ALHR, SCT3060ALHR, SCT3080ALHR, SCT3120ALHR, SCT3022KLHR, SCT3030KLHR, SCT3040KLHR,SCT3080KLHR SCT3105KLHR, SCT3160KLHR, SCT2080KEHR In recent years an increasing number of automotive makers are offering electric vehicles in response to growing environmental awareness and rising fuel costs. However, although EVs are becoming more widespread, their relatively short driving range remains problematic. To improve driving distance, batteries are trending towards larger battery capacities with shorter charging times. This, in turn, demands high power and efficiency on board chargers such as 11kW and 22kW, leading to increased adoption of SiC MOSFET...

Vishay broadened its optoelectronics portfolio with the release of two new series of optocouplers with phototriac output in compact DIP-6 and SMD-6 packages. Offering high off-state voltage of 800 V and static dV/dt of 1000 V/μs, the Vishay Semiconductors VOT8026A and VOT8123A deliver high robustness and noise isolation for home appliances and industrial equipment. The optocouplers announced today isolate low voltage logic from 120 VAC, 240 VAC, and 380 VAC lines to control resistive, inductive, or capacitive loads, including motors, solenoids, high current thyristors, or TRIACs and relays. Reducing design costs and saving board space, the devices consist of a GaAs infrared LED optically coupled to either a zero-crossing TRIAC (VOT8026A) for EMI reduction without the need for external snubber networks, or a random-phase TRIAC (VOT8123A) to enable phase-independent switching. The high off-state voltage of the VOT8026A and VOT8123A enhances safety margins in one-phase applications, wh...

Vishay introduced new -30 V and -40 V Automotive Grade p-channel TrenchFET® power MOSFETs in the PowerPAK® SO-8L package with gullwing leads for increased board-level reliability. Providing more than a 50 % reduction in mounting area compared to devices in the DPAK, the AEC-Q101 qualified SQJ407EP and SQJ409EP save PCB space and lower costs, while delivering the lower on-resistance than any MOSFET with gullwing leads in the 5 mm by 6 mm footprint. Source: https://www.vishay.com/company/press/releases/2019/SQJ407EPandSQJ409EP/ http://www.vishay.com/docs/62806/sqj407ep.pdf , http://www.vishay.com/docs/77707/sqj409ep.pdf

Maxim release Industry’s First Highly Integrated USB-C Buck Charger, Maxim Reduces Size by 30 Percent. Designers of portable Li-ion battery-powered electronics now have a simplified and more flexible way to add a USB Type-C (USB-C) charging system to their products with the MAX77860 3A switch-mode charger from Maxim Integrated Products, Inc. (NASDAQ: MXIM). This USB-C buck charger provides the industry’s first integrated USB-C port controller and charger to eliminate the need for a separate host controller, simplify software development and reduce overall bill-of-materials (BOM) costs for applications such as financial point-of-sale terminals, power banks, industrial computers, scanners, radios, medical devices, charging cradles, portable speakers and game players. Source: https://www.maximintegrated.com/en/aboutus/newsroom.html

IDT Announces 64G Linear Modulator Driver Series for Coherent Applications The IDT® GX7647x series comprises 4 channels, 64G linear optical modulator drivers for 400G/600G coherent applications with a 16QAM/64QAM modulation format.  The GX76470/1/3, GX76472 and GX76474 drivers are designed with the frequency response, output impedance, and the driving voltage swing to obtain the best performance working in tandem with the Indium Phosphide, Lithium Niobate and Silicon Photonics optical modulators, respectively.  Those drivers are suitable for 400G ZR, Metro, and DC applications, and are compliant with OIF requirements for highly integrated optical sub-assembly modules, such as HB-CDM and IC-TROSA.  The GX7647x provide the advanced features, which differentiate the performance of the customer’s HB-CDM and IC-TROSA The GX7647x driver family covers various types of coherent optical modulators," said Dr. Koichi Murata, marketing director, telecom, for IDT's optical inter...

The INAP562T/INAP592TAQ together with an APIX3 receiver offers the next generation high-speed digital serial link over Coax or Shielded Twisted Pair (STP) cable for display applications. In dual lane mode its scalable physical layer provides bandwidth of up to 12 GBit/s over distances of up to 10m at lowest EMI. The devices offer both, a HDMI 1.4a (3D) and a dual MIPI DSI 1.2 video interface to handle 1 or 2 independent video streams of different resolution. The INAP592TAQ additionally includes HDCP 1.4 encryption. Further the devices provide a 10/100 Mbps Ethernet channel, completely independent Full Duplex Communication channels and general purpose signals. Using the internal AShell protocol, data transfers are protected by error detection and retransmission mechanisms. Source: https://inova-semiconductors.de/news-detail/new-twin-serdes-devices-in-the-apix3-family-from-inova-semiconductors.html https://inova-semiconductors.de/inap562taq-592taq.html?file=files/daten/documents_pu...

IDT introduced the industry’s first integrated Serial Presence Detect (SPD), temperature sensor and control plane hub component (referred to as “SPD Hub”) developed for DDR5-based Dual In-Line Memory Modules (DIMM). The IDT® SPD Hub is designed to provide a space and power efficient solution that enables control plane operation at significantly higher speeds than previous system management buses with enhanced reliability. DDR5 memory is projected to double the bandwidth of DDR4, and as with previous generations of DDR memory, IDT’s devices are leading the market in performance and reliability. IDT’s DDR5 PMIC enables the next generation of server DIMM solutions to efficiently scale to greater performance, density and reliability while reducing overall system power. IDT’s SPD Hub significantly increases the system management bus performance by eliminating the bottlenecks of traditional system management buses. The DDR5 RCD, PMIC, SPD Hub and TS  devices are used in RDIMM, L...

The DGD2003/2005 and DGD2012 are 200V gate driver ICs designed for driving two external N-channel MOSFETs in a half-bridge configuration. DGD2003S8-13, DGD2005S8-13, DGD2012S8-13 https://www.diodes.com/assets/Uploads/DGD2003-Half-Bridge-Gate-Driver-ICs.pdf

4-Port, 4-lane, PCIe2 Packet Switch PI7C9X2G404SV, PI7C9X2G404EV 3-Port, 4-lane, PCIe2 Packet Switch PI7C9X2G304SV, PI7C9X2G304EV https://www.diodes.com/assets/product-showcases/PCI-Express-2.0-Packet-Switches-with-Low-Power-Solutions-Diodes-PI7C9X2Gx04SV-EV-NPA-022019.pdf

The AP7366 is a 600mA, adjustable and fixed output voltage, low dropout linear regulator. This device includes pass element, error amplifier, band-gap, current limit and thermal shutdown circuitry. The device is turned on when EN pin is set to logic high level. The characteristics of low dropout voltage and low quiescent current make it suitable for low power applications such as battery powered devices. The typical quiescent current is approximately 60µA. Built-in current-limit and thermal-shutdown functions prevent IC from damage in fault conditions. This device is available with adjustable output from 0.8V to 5.0V, and fixed version with 1.0V, 1.2V, 1.5V, 1.8V, 2.0V, 2.5V, 2.8V, 3.0V, 3.3V and 3.9V outputs.  The AP7366 is available in SOT25 and U-DFN2020-6 packages. AP7366-18W5-7 AP7366-33SN-7 AP7366-W5-7 AP7366-33W5-7 AP7366-39W5-7 Wide Input Voltage Range: 2.2V to 6V Wide Adjustable Output: 0.8V to 5.0V Fixed Output Options: 1.0V, 1.2V,1.5V, 1.8V, 2.0V, 2.5V, 2.8V...