New Silicons and Electronics

The Nordic Thingy:91 is an easy-to-use battery-operated prototyping platform for cellular IoT using LTE-M, NB-IoT and GPS. It is ideal for creating Proof-of-Concept (PoC), demos and initial prototypes in your cIoT development phase. NRF6943  Nordic Thingy:91 is as Multi-sensor cellular IoT prototyping kit supporting LTE-M, NB-IoT, GPS and Bluetooth Low Energy. The Nordic Thingy:91 is the ideal way to kickstart your cellular IoT project using the nRF9160 SiP. Thingy:91 is equipped with a broad collection of diverse sensors and interfaces that make it highly adaptable to rapid prototyping and getting your proof of concept off the ground in no time at all. Nordic Thingy:91         Key features • Battery-operated prototyping platform for the nRf9160 SiP • 700-900 MHz + 1710-2200 MHz LTE band support • Certifications: CE, FCC • nRF52840 multiprotocol SoC on board • LTE-M/NB-IoT/GPS antennas • Nano/4FF SIM card slot • User-programmable button a...

ON Semiconductor driving energy efficient innovations, continues to enable battery-less and maintenance-free IoT with the introduction of its RSL10 Multi-Sensor Platform powered solely with a solar cell. This complete solution supports the development of IoT sensors using continuous solar energy harvesting to gather and communicate data through Bluetooth® Low Energy, without the need for batteries or other forms of non-renewable energy. The RSL10 Solar Cell Multi-Sensor platform is a complete, low-cost solution for developing self-powered sensor nodes using harvested solar energy. Based on the RSL10 SIP- the industry's lowest power Bluetooth ® 5 radio, the RSL10 Solar Cell Multi-Sensor platform supports continuous Bluetooth Low Energy transmission of sensor information without requiring any batteries. The fully-integrated platform features multiple smart sensors, an ultra-low quiescent current LDO regulator (NCP170), and a 2-port connector for the provided solar cell (FlexRB-25-70...

The world’s smallest PANdrive™ smart motor solution by Trinamic includes a NEMA8 stepper motor combined with the TMCM-1210 controller / driver for precise motion. TMCM-1210-CABLE - Cable loom for TMCM-1210. TMCM-1210 - 1-Axis stepper controller / driver, 0.6A RMS, 24V DC TMCM-1210 Stepper Controller / Driver, 24V DC Features NEMA8 stepper motor with 0.0175Nm holding torque Ssupply voltage: +6 to+ 30V DC Up to 0.6A RMS motor current RS485 interface Integrated simple hall-sensor based encoder 1x multi-purpose input with controller/driver Linear and SixPoint™ ramps for more details https://www.trinamic.com/products/drives/stepper-pandrives-details/pd20-1-1210/ https://www.trinamic.com/company/news/news-detail/smart-motors-made-small/ Manual https://www.trinamic.com/fileadmin/assets/Products/Drives_Documents/PD20-1-1210_hardware_manual_V110.pdf

The MAX6226 is an ultra-low-noise, high-precision, lowdropout voltage reference. This family of voltage references feature curvature-correction circuitry and high-stability, laser-trimmed, thin-film resistors that result in 5ppm/°C (max) temperature coefficients and an excellent ±0.02% (max) initial accuracy. The proprietary low-noise reference architecture produces a low flicker noise of 1.45μVP-P and wideband noise as low as 75nV/√Hz (2.5V output) without the increased supply current usually found in low-noise references. Improve wideband noise to 45nV/√Hz and AC power-supply rejection by adding a 0.1μF capacitor at the noise reduction pin. The MAX6226 series mode reference operates from a wide 2.7V to 12.6V supply voltage range and load-regulation specifications are guaranteed to be less than 0.25Ω and 0.05Ω for sink and source currents up to 10mA, respectively. These devices are available over the automotive temperature range of -40°C to +125°C. Low 200mV (Max) Dropout Voltage 3...

EFR32xG21 Wireless Mesh Starter Kit SLWSTK6006A https://www.silabs.com/products/development-tools/wireless/efr32xg21-wireless-starter-kit The EFR32xG21Wireless Start Kit supports Bluetooth, Zigbee, Thread and Multiprotocol Zigbee/Bluetooth software stacks. Our software provides one-click access to design tools, documentation, software and support resources for Wireless Modules and SoCs using Bluetooth. Get up and running quickly with precompiled demos, application notes and examples. Use advanced tools including energy profiling and network analysis to optimize your wireless systems. SLWSTK6006A EFR32xG21Wireless Start Kit EFR32xG21 2.4GHz +20 dBm Radio Board SLWRB4180A The Wireless Gecko SLWRB4180A wireless radio board plugs into the Main Board provided with the  Wireless Gecko Starter Kit . The starter kit includes access to Zigbee® and Thread software stacks. The modular design supports different radio boards, enabling developers to develop Zig...

The MAX20336 ultra-small, low-on-resistance (RON) double-pole/single throw (DPST) analog switches feature Beyond-the-Rails™ capability that allows signals from -5.5V to +5.5V to pass without distortion, even when the power supply is below the signal range. The low onresistance (0.19Ω) also makes the devices ideal for lowdistortion switching applications, such as audio or video. Low Supply Current 65μA (Typ) at 1.6V On-Resistance 0.19Ω (Typ) +1.6V to +5.5V Single-Supply Range ESD Protection ±30kV Human Body Model 6-Bump WLP (1.308mm x 0.828mm) -40°C to +85°C Operating Temperature Range MAX20336EVKIT#  Evaluation Kit The MAX20336 evaluation kit (EV kit) https://datasheets.maximintegrated.com/en/ds/MAX20336EVKIT.pdfis a fully assembled and tested circuit board that demonstrates the MAX20336 beyond-the-rails DPST analog switches. EV Kit Contents : EV Kit Board Containing a MAX20336 IC Part MAX20336ENT+, MAX20336ENT+T, MAX20336AEFT+*, MAX20336AEFT+T* * Denotes a future p...

The DS28E84 is a radiation-resistant secure authenticator that provides a core set of cryptographic tools derived from integrated asymmetric (ECC-P256) and symmetric (SHA-256) security functions. In addition to the security services provided by the hardware implemented crypto engines, the device integrates a FIPS-compatible true random number generator (TRNG), 10Kb of secured OTP, 15Kb of FRAM, one configurable GPIO, and a unique 64-bit ROM identification number (ROM ID). Operating Range: 3.3V ±10%, 0°C to +50°C ±8kV HBM ESD Protection of 1-Wire IO Pin 6-Pin, 3mm x 3mm TDFN Advanced 1-Wire Protocol Minimizes Interface to Just Single Contact Unique and Unalterable Factory Programmed 64-Bit Identification Number (ROM ID) SHA-256 OTP (One-Time Pad) Encrypted R/W of Configurable Memory Through ECDH Established Key ECC-P256 Compute Engine DS28E84EVKIT# The DS28E84 evaluation system (EV system) provides the hardware and software necessary to exercise the features of the DS28E8...

The KITPF8100FRDMEVM and KITPF8200FRDMEVM are a customer evaluation boards featuring the PF8100 and PF8200 power management IC. The kits integrates all hardware needed to fully evaluate the featured power management integrated circuit. It integrate a communication bridge based on the FRDM-KL25Z freedom board to interface with the FlexGUI software interface to fully configure and control the PF8100/ PF8200 PMIC. PF8100/PF8200 Evaluation Boards Kit Contains 1. Assembled and tested KITPF8100FRDMEVM and KITPF8200FRDMEVM, and preprogrammed FRDM-KL25Z microcontroller board in an anti-static bag 2. 3.0ft. USB-STD A to USB-B-mini cable 4. USB to mini USB cable 5. Quick Start Guide Supported Devices: PF8100_PF8200: Power Management Integrated Circuit (PMIC) for high-performance processing applications For more details https://www.nxp.com/support/developer-resources/evaluation-and-development-boards/analog-toolbox/pf8100-pf8200-customer-evaluation-boards:PF8100-PF820...

The MKR Motor Carrier is an MKR add-on board designed to control servo, DC, and stepper motors. The Carrier can also be used to connect other actuators and sensors via a series of 3-pin male headers. for more details please click this link   https://store.arduino.cc/usa/mkr-motor-carrier ASX00003 MKR Motor Carrier The summary of features is shown below: 1.       Compatible with all the boards in the MKR family 2.       Four servo motor outputs 3.       Four DC motor outputs (two high performance + two standard performance) 4.       Sensing of current feedback for the high-performance motors 5.       Two inputs for encoder sensors 6.       Four inputs for analog sensors (3-pin compatible) 7.       Possibility to read the status of the batteries 8.       ON...

ZGM130S - SIP Module: The Silicon Labs Z-Wave 700 Zen Gecko SiP Module, ZGM130S, is a fully integrated Z-Wave module, enabling rapid development of Z-Wave solutions. A baseband controller, Sub-GHz radio transceiver, crystal, decoupling, and matching is included to provide a complete Z-Wave System-in-Package module requiring only an external antenna. An ideal solution for smart home control and sensing applications such as sensors, door locks, light switches, security networks as well as gateways. ZGM130S037HGN1 ---> Tray packing ZGM130S037HGN1R ---> Tray  Tape & Reel packing Source : https://www.silabs.com/products/development-tools/wireless/mesh-networking/z-wave/z-wave-700-hardware Datasheet:  https://th.mouser.com/datasheet/2/368/Silicon_Laboratories_02072019_ZGM130S-1531105.pdf

The Z-Wave 700 Zen Gecko Wireless Starter Kit includes the Z-Wave software stack, sample code and integrated debug adapter. A single world-wide development kit for both end devices and gateways with multiple radio boards enable developers to create a mesh network and evaluate the Z-Wave 700 module. With the supporting Simplicity Studio suite of tools, developers can accelerate their wireless application development; mesh networking debug and Z-Wave protocol sniffer tools for analysis; and visual energy profiling and optimization. The Z-Wave 700 SDK is downloaded through Simplicity Studio. In Simplicity Studio, developers can access all documentation, developer guides and much more SLWSTK6050A Z-Wave 700 Wireless Starter Kit ZGM130S - SIP Module: The Silicon Labs Z-Wave 700 Zen Gecko SiP Module, ZGM130S, is a fully integrated Z-Wave module, enabling rapid development of Z-Wave solutions. A baseband controller, Sub-GHz radio transceiver, crystal, decoupling, and matching is in...