Inova INAP562TAQ TWIN Transmitters APIX3 SerDes family

The INAP562T/INAP592TAQ together with an APIX3 receiver offers the next generation high-speed digital serial link over Coax or Shielded Twisted Pair (STP) cable for display applications. In dual lane mode its scalable physical layer provides bandwidth of up to 12 GBit/s over distances of up to 10m at lowest EMI. The devices offer both, a HDMI 1.4a (3D) and a dual MIPI DSI 1.2 video interface to handle 1 or 2 independent video streams of different resolution. The INAP592TAQ additionally includes HDCP 1.4 encryption. Further the devices provide a 10/100 Mbps Ethernet channel, completely independent Full Duplex Communication channels and general purpose signals. Using the internal AShell protocol, data transfers are protected by error detection and retransmission mechanisms.

Source:
https://inova-semiconductors.de/news-detail/new-twin-serdes-devices-in-the-apix3-family-from-inova-semiconductors.html

https://inova-semiconductors.de/inap562taq-592taq.html?file=files/daten/documents_public/datasheets/APIX3_INAP562T_592T_flyer.pdf

Comments

Microchip New SAMV71Q21RT, SAMRH71 Radiation-Tolerant and Radiation-Hardened Arm® MCU

Microchip introduced the space industry’s first Arm®-based microcontrollers (MCUs) that combine the low-cost and large ecosystem benefits of Commercial Off-the-Shelf (COTS) technology with space-qualified versions that have scalable levels of radiation performance. Based on the automotive-qualified SAMV71, the SAMV71Q21RT radiation-tolerant and SAMRH71 radiation-hardened MCUs implement the widely deployed Arm® Cortex®-M7 System on Chip (SoC), enabling more integration, cost reduction and higher performance in space systems. SAMV71Q21RT is the radiation tolerant version of the popular Microchip SAMV71Q21. This space-qualified version of the product adds: Ceramic & hermetic package, extended temperature range -40C to 125C, extended qualification flow according to QML-V or QML-Q space grade flow. Radiation performance for the SAMV71Q21RT: SEL LET > 60 MeV.cm2/mg (at 125C), and TID up to 20 Krad (Si). SAMRH71 is the Radiation-Hardened-By-Design (RHBD) version of...

Arduino ASX00003 MKR Motor Carrier Board

The MKR Motor Carrier is an MKR add-on board designed to control servo, DC, and stepper motors. The Carrier can also be used to connect other actuators and sensors via a series of 3-pin male headers. for more details please click this link https://store.arduino.cc/usa/mkr-motor-carrier ASX00003 MKR Motor Carrier The summary of features is shown below: 1. Compatible with all the boards in the MKR family 2. Four servo motor outputs 3. Four DC motor outputs (two high performance + two standard performance) 4. Sensing of current feedback for the high-performance motors 5. Two inputs for encoder sensors 6. Four inputs for analog sensors (3-pin compatible) 7. Possibility to read the status of the batteries 8. ON...

Nordic Thingy: 91 Multi-sensor cellular IoT Prototyping kit

The Nordic Thingy:91 is an easy-to-use battery-operated prototyping platform for cellular IoT using LTE-M, NB-IoT and GPS. It is ideal for creating Proof-of-Concept (PoC), demos and initial prototypes in your cIoT development phase. NRF6943 Nordic Thingy:91 is as Multi-sensor cellular IoT prototyping kit supporting LTE-M, NB-IoT, GPS and Bluetooth Low Energy. The Nordic Thingy:91 is the ideal way to kickstart your cellular IoT project using the nRF9160 SiP. Thingy:91 is equipped with a broad collection of diverse sensors and interfaces that make it highly adaptable to rapid prototyping and getting your proof of concept off the ground in no time at all. Nordic Thingy:91 Key features • Battery-operated prototyping platform for the nRf9160 SiP • 700-900 MHz + 1710-2200 MHz LTE band support • Certifications: CE, FCC • nRF52840 multiprotocol SoC on board • LTE-M/NB-IoT/GPS antennas • Nano/4FF SIM card slot • User-programmable button a...

New Silicons and Electronics

Search This Blog