Skip to main content

Posts

Showing posts from July, 2019

1200V Silicon Carbide MOSFETs from Infineon

Infineon new CoolSiC™ 1200V Silicon Carbide Trench MOSFETs

IMW120R030M1HXKSA11200V 56A SiC Trench MOSFET TO247-3 IMW120R045M1XKSA11200V 52A SiC Trench MOSFET TO247-3 IMW120R060M1HXKSA11200V 36A SiC Trench MOSFET TO247-3 IMW120R090M1HXKSA11200V 26A SiC Trench MOSFET TO247-3 IMW120R140M1HXKSA11200V 19A SiC Trench MOSFET TO247-3 IMW120R220M1HXKSA11200V 13A SiC Trench MOSFET TO247-3 IMW120R350M1HXKSA11200V 4.7A SiC Trench MOSFET TO247-3 IMZ120R030M1HXKSA11200V 56A SiC Trench MOSFET TO247-4 IMW120R045M1XKSA11200V 52A SiC Trench MOSFET TO247-3 IMZ120R060M1HXKSA11200V 36A SiC Trench MOSFET TO247-4 IMZ120R090M1HXKSA11200V 26A SiC Trench MOSFET TO247-4 IMZ120R140M1HXKSA11200V 19A SiC Trench MOSFET TO247-4 IMZ120R220M1HXKSA1"1200V 13A SiC Trench MOSFET TO247-4 IMZ120R350M1HXKSA11200V 4.7A SiC Trench MOSFET TO247-4


Datasheets

https://www.infineon.com/dgdl/Infineon-IMW120R030M1H-DS-v01_01-EN.pdf?fileId=5546d46269e1c019016a92fde38b669ahttps://www.infineon.com/dgdl/Infineon-IMW120R045M1-DataSh…

VLMU35CL00-280-120 UVC Emitting Diode Ceramic SMT package from Vishay

VLMU35CL is a ceramic based low power UVC LED with quartz window for long life time. The package size is 3.5 mm x 3.5 mm x 1.2 mm and the radiant power typically 3.2 mW at 20 mA in a wavelength range of 265 nm to 285 nm.

Ceramic SMT package with quartz window
Dimension (L x W x H) in mm: 3.5 x 3.5 x 1.2
Forward current: up to 70 mA


https://www.vishay.com/docs/80009/vlmu35clxx-280-120.pdf

https://www.vishay.com/product?docid=80009

FDA903U-KBX 45W Automotive Class-D Audio Power Amplifiers PowerSSO-36 from STMicroelectronics

The FDA903U is a single bridge class D amplifier, designed in the most advanced BCD technology, intended for any automotive audio application (car radio, telematics and e-call, noise and tone generators, etc).

AEC-Q100 qualified
Integrated 108 dB D/A conversion
I2S and TDM digital input (4/8/16CH TDM)
Input sampling frequency: 44.1 kHz, 48 kHz, 96 kHz, 192 kHz
Full I2C bus driving (3.3/1.8 V)


FDA903U-KBT 45W Class-D Audio Power Amplifiers PowerSSO-36
FDA903U-KBX 45W Class-D Audio Power Amplifiers PowerSSO-36

https://www.st.com/resource/en/datasheet/fda903u.pdf

https://www.st.com/en/automotive-infotainment-and-telematics/fda903u.html#overview

FDA803U-KBT 45W Automotive Class-D Audio Power Amplifiers PowerSSO-36 from STMicroelectronics

The FDA803U is a single bridge class D amplifier, designed in the most advanced BCD technology, intended for any automotive audio application (car radio, telematics and e-call, noise and tone generators, etc)

AEC-Q100 qualified
I2S and TDM digital input (4/8/16CH TDM)

FDA803U-KBT Class-D Audio Power Amplifiers PowerSSO-36
FDA803U-KBX Class-D Audio Power Amplifiers PowerSSO-36

https://www.st.com/resource/en/datasheet/fda803u.pdf

L9918BDTR Alternator voltage regulator with LIN interface from STMicroelectronics

L9918 is an alternator voltage regulator equipped with LIN protocol interface. The device is intended to be used in automotive application for 12 V systems. The presence of NVM cells for device parameters programmability makes it suitable for a wide range of charging application.

AEC-Q100 qualifiedClosed loop voltage controlRegulated voltage with thermal compensation functionHigh side excitation driver with internal freewheeling circuitLoad response control (LRC) and Return LRCSelf-start activation by phase signalCurrent limitation and overcurrent protectionThermal protectionPhysical Layer compliant with LIN 2.2A spec.Data Link Layer compliant with LIN 1.3, 2.1, 2.2 and 2.2A specification13 sets of LIN frames selectableConfigurable parameters (see NVM parameter table A1)Configurable for 5, 6, 7, 8 or 9 pole pair alternatorCompliant to VDA LIN-Generator-Regulator specificationFull ISO26262 compliant, ASIL-B systems readyAvailable as Bare die as well as in PENTAWAT…

BM62380MUV-E2 3 Phase Brushless DC Motor VQFN from Rohm

Built-in Speed Control, 3 Hall Sensors Three-Phase Brushless Motor Driver

BM62380MUV is sine wave driver IC for three-phase brushless motor driver with 40 V power supply voltage rating and 2.0 A output current rating. It detects the rotor position by 3 Hall sensors. In addition, it has a speed feedback control function, and controls output PWM Duty by adjusting the rotational frequency characteristics for the input PWM signal and the rotational frequency affected from motor.

Operating Supply Voltage Range: 8 V to 28 V
Output current rating: 2.0 A
Output ON Resistance (top & bottom total): 0.6 Ω (Typ)
Output PWM Frequency: 40 kHz (Typ)
Standby Current: 0.6 mA (Typ)
Operating Temperature Range: -40 °C to +85 °C
Package  VQFN040V6060 6.00 mm x 6.00 mm x 1.00 mm

https://www.rohm.com/datasheet/BM62380MUV/bm62380muv-e

BM64300MUV-E2 3 Phase Brushless DC Motor VQFN from Rohm

3 Hall Sensors Three-Phase Brushless Motor Pre-Driver

BM64300MUV is the pre-driver IC of sine wave drive for three-phase brushless motor driver that supports 48 V power supply controlling the motor driver constructed in external FETs. It detects a rotor position by 3 Hall sensors. In addition, silent and low vibration operations are implemented by making the output current a sine waveform.

Operating Supply Voltage Range : 28 V to 63 V
Output PWM Frequency : 40 kHz (Typ)
Standby Current : 1.2 mA (Typ)
Operating Temperature Range : -40 °C to +105 °C
Package VQFN032V5050 5.00 mm x 5.00 mm x 1.00 mm



https://www.rohm.com/datasheet/BM64300MUV/bm64300muv-e

BM62351MUV-E2 3 Phase Brushless DC Motor VQFN from Rohm

Built-in Speed Control, 3 Hall Sensors Three-Phase Brushless Motor Pre-Drive

BM62351MUV is the pre-driver IC of sine wave drive for three-phase brushless motor driver that supports 24 V power supply controlling the motor driver constructed in external FETs. It detects a rotor position by 3 Hall sensors. In addition, it has a speed feedback control function, and controls output PWM Duty by adjusting the rotational frequency characteristics for the input CLKIN signal and the rotational frequency affected from motor.

Operating Supply Voltage Range : 8 V to 28 V
Output PWM Frequency : 40 kHz (Typ)
Standby Current : 0.6 mA (Typ)
Operating Temperature Range : -40 °C to +105 °C
Package VQFN032V5050 5.00 mm x 5.00 mm x 1.00 mm


https://www.rohm.com/datasheet/BM62351MUV/bm62351muv-e

BM62350MUV-E2 3 Phase Brushless DC Motor VQFN from Rohm

Built-in Speed Control, 3 Hall Sensors Three-Phase Brushless Motor Pre-Driver

BM62350MUV is the pre-driver IC of sine wave drive for three-phase brushless motor driver that supports 24 V power supply controlling the motor driver constructed in external FETs. It detects a rotor position by 3 Hall sensors. In addition, it has a speed feedback control function, and controls output PWM Duty by adjusting the rotational frequency characteristics for the input PWM signal and the rotational frequency affected from motor.


Operating Supply Voltage Range : 8 V to 28 V
Output PWM Frequency : 40 kHz (Typ)
Standby Current : 0.6 mA (Typ)
Operating Temperature Range : -40 °C to +105 °C
Package  VQFN032V5050 5.00 mm x 5.00 mm x 1.00 mm

https://www.rohm.com/datasheet/BM62350MUV/bm62350muv-e

AP2205 Series 200mA LDO Regulator from Diodes Inc.

The AP2205 series is a positive voltage regulator IC fabricated by high voltage EPNP process.
The AP2205 has features of wide input voltage range, high accuracy, high ripple rejection, low dropout voltage, low noise, current limit and ultra-low quiescent current which make it ideal for use in various USB and portable devices.
The IC consists of a voltage reference, an error amplifier, a resistor network for setting output voltage, a current limit circuit for current protection, and a chip enable circuit, a low power shutdown mode for extended battery life, over current protection, over temperature protection, as well as reversed-battery protection.
The AP2205 has 1.5V, 1.8V, 2.5V, 2.8V, 3.0V, 3.3V, 5.0V fixed voltage versions and adjustable voltage version.
The AP2205 is available in space-saving SOT25 and SOT89 packages.

AP2205-33Y-13  LDO 3.3V 200mA SOT89-4
AP2205-33Y-13  LDO 3.3V 200mA SOT89-4
AP2205-33YR-13  LDO 3.3V 200mA SOT89-4
AP2205-50Y-13  LDO 5V 200mA SOT89-4
AP2205-50Y-13…

30V and 40V Schottky Barrier Diode SOD-323HE from Toshiba

Toshiba  has launched eight 30 V/40 V Schottky Barrier Diodes (SBD): “CUHSxxF40”, “CUHSxxF30”, “CUHSxxS40” and “CUHSxxS30” which are suitable for voltage boosting circuits to drive LCD backlights of mobile devices such as smartphones, tablets and laptop PCs, expanding the lineup


CUHS20F40Schottky Barrier Diode 40V 2ALow forward voltageCUHS15F40Schottky Barrier Diode 40V 1.5ALow forward voltageCUHS20F30Schottky Barrier Diode 30V 2ALow forward voltageCUHS15F30Schottky Barrier Diode 30V 1.5ALow forward voltageCUHS20S40Schottky Barrier Diode 40V 2AUltra-low forward voltageCUHS15S40Schottky Barrier Diode 40V 1.5AUltra-low forward voltageCUHS20S30Schottky Barrier Diode 30V 2AUltra-low forward voltageCUHS15S30Schottky Barrier Diode 30V 1.5AUltra-low forward voltage

https://toshiba.semicon-storage.com/ap-en/company/news/new-products-share/diode/diode-20190710-1d.html
https://toshiba.semicon-storage.com/ap-en/product/diode/sbd/detail.CUHS20F40.htmlhttps://toshiba.semicon-storage.com/ap-en/product…

BCM56880 Ethernet switches from Broadcom

The StrataXGS® Trident 4 series is a family of Ethernet switches designed to address performance, capacity, and service requirements for next-generation data center and cloud computing environments as well as high-bandwidth enterprise and mobile network applications. The Trident 4 architecture delivers complete, user-programmable forwarding and instrumentation capabilities at a very high port density, while maintaining minimum power, latency and board footprint.

https://www.broadcom.com/products/ethernet-connectivity/switching/strataxgs/bcm56880-series#overview

DS28C40G/V+U DeepCover Automotive I2C Authenticator TDFN-10 from Maxim

The DS28C40 is a secure authenticator that provides a core set of cryptographic tools derived from integrated asymmetric (ECC-P256) and symmetric (SHA-256) security functions. In addition to the security services provided by the hardware implemented crypto engines, the device integrates a FIPS/NIST true random number generator (TRNG), 6kb of one-time programmable (OTP) memory for user data, keys and certificates, one configurable GPIO, and a unique 64-bit ROM identification number (ROM ID).

I2C Communication Up to 1MHz
3.3V ±10%, -40°C to +125°C Operating Range
10-Pin, 3mm x 4mm TDFN Package
AEC-Q100 Grade 1

DS28C40EVKIT# DeepCover Secure Authenticator Evaluatio Kit

DS28C40G/V+T DeepCover Secure Authenticator TDFN-10
DS28C40G/V+U  DeepCover Secure Authenticator TDFN-10


https://www.mouser.co.uk/_/?Keyword=DS28C40G%2FV%2BU

MAX20070BGTJA/V+ Integrated TFT Power Supplies and LED Backlight Driver TQFN-32 from Maxim

The MAX20070/MAX20070B are highly integrated power supplies and LED backlight drivers for automotive TFT-LCD applications. The devices integrate one buck-boost converter, one boost converter, two gate-driver supplies, and a boost/SEPIC converter that can power one to two strings of LEDs in the display backlight.

Integrates Both TFT Power Supplies and LED Backlight Driver in One IC, Reducing Component Count
Alleviates EMI Due to Spread Spectrum on Both Source Driver Supplies and LED Driver
10000:1 Dimming Ratio at 200Hz Dimming Frequency
-40°C to +105°C Ambient Temperature Range
Available in a 32-Pin (5mm x 5mm) TQFN with an Exposed Pad
AEC-Q100 Qualified

MAX20070EVKIT# Evaluation Kit 
MAX20070GTJ/V+MAX20070GTJA/V+MAX20070BGTJ/V+MAX20070BGTJA/V+
https://www.mouser.co.uk/_/?Keyword=MAX20070GTJ%2FV%2B https://www.digikey.com/product-detail/en/maxim-integrated/MAX20070GTJ-V/MAX20070GTJ-V-ND/7916299

MAX20044FGEEA/V+ Automotive Hi-Speed USB 2.0 Protector QSOP-16 from Maxim

The MAX20042F, MAX20043F, and MAX20044F devices provide high ESD and short-circuit protection for the low-voltage internal USB data and USB power line in automotive radio, navigation, connectivity, and USB hub applications. The devices support USB Hi-Speed (480Mbps), USB full-speed (12Mbps), and USB low-speed (1.5Mbps) operation, as well as USB on-the-go (OTG) functionality.

-40°C to +105°C Operating Temperature Rang
AEC-Q100 Qualified
16-Pin (3.90mm x 4.94mm) QSOP Package

MAX20044EVKIT# USB 2.0 Evaluation Kit (kit can also evaluate the MAX20042F and MAX20043F)

MAX20042FGEEA/V+USB 2.0 Protector, 650mA, QSOP 16 PinsMAX20042FGEEB/V+USB 2.0 Protector, OTG, 650mA, QSOP 16 PinsMAX20043FGEEA/V+USB 2.0 Protector, 1A, QSOP 16 PinsMAX20043FGEEB/V+USB 2.0 Protector, OTG, 1A, QSOP 16 PinsMAX20044FGEEA/V+USB 2.0 Protector, 1.3A, QSOP 16 PinsMAX20044FGEEB/V+USB 2.0 Protector, OTG, 1.3A, QSOP 16 Pins
https://www.maximintegrated.com/en/products/interface/universal-serial-bus/MAX20042F.html

MAX20046 Automotive Hi-Speed USB 2.0 Protector from Maxim

The MAX20046 device provides high-ESD and shortcircuit protection for the low-voltage internal USB data and USB power line in automotive radio, navigation, connectivity, and USB hub applications. The device supports USB Hi-Speed (480Mbps), USB full-speed (12Mbps), and USB low-speed (1.5Mbps) operation.

-40°C to +105°C Operating Temperature Rang
AEC-Q100 Qualified
MAX20046EVKIT# USB 2.0 Evaluation Kit


MAX20046GTCA/V+USB 2.0 Protector, TQFN-EP 12 PinsGPIO-selectable 23/45mA current limitsMAX20046GTCA/V+TUSB 2.0 Protector, TQFN-EP 12 PinsGPIO-selectable 23/45mA current limitsMAX20046GTC/V+USB 2.0 Protector, TQFN-EP 12 PinsGPIO-selectable 60/120mA current limitsMAX20046GTC/V+TUSB 2.0 Protector, TQFN-EP 12 PinsGPIO-selectable 60/120mA current limitsMAX20046GTCA/VY+USB 2.0 Protector, SW TQFN-EP 12 PinsGPIO-selectable 23/45mA current limitsMAX20046GTCA/VY+TUSB 2.0 Protector, SW TQFN-EP 12 PinsGPIO-selectable 23/45mA current limitsMAX20046GTC/VY+USB 2.0 Protector, SW …

MAX77654AENVN+T Ultra-Low Power PMIC Featuring Single Inductor WLP-30 from Maxim

The MAX77654 provides highly-integrated battery charging and power supply solutions for low-power applications where size and efficiency are critical. The IC features a SIMO buck-boost regulator that provides three independently programmable power rails from a single inductor to minimize total solution size. Two 100mA LDOs provide ripple rejection for audio and other noise-sensitive applications. The LDOs can also be configured as load switches to manage power consumption by disconnecting external blocks when not required. A highly-configurable linear charger supports a wide range of Li+ battery capacities and includes battery temperature monitoring for additional safety (JEITA).

Benefits and Features
3x Output, Single-Inductor Multiple-Output (SIMO) Buck-Boost Regulator
2x 100mA LDO/LSW
Smart Power Selector™ Li+/Li-Poly Charger
3x GPIO Resources
Analog MUX Output for Power Monitoring
6μA Operating Current (3 SIMO Channels + 2 LDOs)
6.52mm2 Wafer-Level Package (WLP-30)
-40°C to +85°C …

SST26VF064BEUI Flash Memory 64 Mbit Serial Quad I/O (SQI) from Microchip

The Serial Quad I/O™ (SQI™) family of flash-memory devices features a six-wire, 4-bit I/O interface that allows for low-power, high-performance operation in a low pin-count package. SST26VF032BEUI also support full command-set compatibility to traditional Serial Peripheral Interface (SPI) protocol. System designs using SQI flash devices occupy less board space and ultimately lower system costs.

Factory-programmed with EUI-48™ and EUI-64™ Global Unique Identifier
Burst Modes- Continuous linear burst, 8/16/32/64 Byte linear burst with wrap-around
age-Program- 256 Bytes per page in x1 or x4 mode
Industrial -40C to +85C
Single Voltage Read and Write Operations 2.7-3.6V or 2.3-3.6V
8-contact WDFN (6mm x 5mm)
8-lead SOIJ (5.28 mm)
8-lead SOIC (3.90 mm)

SST26VF064BEUI-104I/MFFlash Memory 64 Mbit Serial Quad I/O (SQI) WDFN-8SST26VF064BEUI-104I/MFFlash Memory 64 Mbit Serial Quad I/O (SQI) WDFN-8SST26VF064BEUIT-104I/MFFlash Memory 64 Mbit Serial Quad I/O (SQI) WDFN-8SST26VF064BEUIT-104I/SMFlas…

A19350LUBATN-FBE High Accuracy GMR Wheel Speed and Direction Sensor IC 2-Pin SIP from Allegro MicroSystems

The A19350 is a giant magnetoresistance (GMR) integrated circuit (IC) that provides a user-friendly two-wire solution for applications where speed and direction information is required. The small integrated package includes an integrated capacitor and GMR IC in a single overmold design with an additional molded lead-stabilizing bar for robust shipping and ease of assembly.

GMR technology integrates high sensitivity MR (magnetoresistive) sensor elements and high precision BiCMOS circuits on a single silicon integrated circuit, offering high accuracy, low magnetic field operation
Integrated capacitor in a single overmolded miniature package provides greater EMC robustness
SolidSpeed Digital Architecture™ supports advanced algorithms, maintaining performance in the presence of extreme system-level disturbances, including vibration immunity capability over the full target pitch
Flexible orientation for xMR or Hall replacement
ASIL B rating based on integrated diagnostics and certified safety d…

A19250LUBATN High Accuracy GMR Wheel Speed Sensor IC 2-Pin SIP from Allegro MicroSystems

The A19250 is a giant magnetoresistance (GMR) integrated circuit (IC) that provides a user-friendly two-wire solution for applications where speed information is required. The small integrated package includes an integrated capacitor and GMR IC in a single overmold design with an additional molded lead-stabilizing bar for robust shipping and ease of assembly.

GMR technology integrates high sensitivity MR (magnetoresistive) sensor elements and high precision BiCMOS circuits on a single silicon integrated circuit, offering high accuracy, low magnetic field operation
Integrated capacitor in a single overmolded miniature package provides greater EMC robustness
SolidSpeed Digital Architecture™ supports advanced digital processing providing highly accurate edge performance in the presence of extreme system-level disturbances
Compatible orientation for Hall replacement
Two-wire current source output supporting speed protocol
EEPROM offers device traceability throughout the production process

https…

TSCR400CX6H RFG Linear Constant Current Regulated LED Driver SOT-26-6 from Taiwan Semiconductor

The TSCR400 & TSCR402 are High-Side Constant Current Regulator (CCR) for linear LED driving. The device regulates with a preset TSCR400 0.1mA and TSCR402 20mA nominal that can be adjusted with an external resistor up to 65mA. It is designed for driving LEDs in strings and will reduce current at increasing temperatures to self-protect. Operating as a series linear CCR for LED string current control, it can be used in multiple applications, as long as the maximum supply voltage to the device is <40v .="" nbsp="" p="">The output current at higher temperatures is the result of the negative temperature coefficient of -0.07%/°C of the LED driver.

AEC-Q100 Automotivequalified
-40°C to 125°C Device temperature grade
LED drive current preset:
TSCR400CX6: 0.1mA
TSCR402CX6: 20mA

TSCR400CX6H RFG SOT-26 6 Pins
TSCR402CX6H RFG SOT-26 6 Pins

https://www.taiwansemi.com/products/datasheet/TSCR400_402CX6H_A1905.pdf

ILD8150E 80V DC-DC buck LED Driver SOIC-8 from Infineon

The ILD8150E is a 80V DC-DC converter IC, designed to drive high power LEDs. For applications operating close to safe extra-low voltage (SELV) limits, it provides a high safety voltage margin. The buck LED driver IC is tailored for LEDs in general lighting applications with average currents up to 1.5A using a high-side integrated switch. Several performance and protection features provide ideal fit for professional LED lighting.

LED driver IC for high power LEDs with hybrid dimming down to 0.5%

DC/DC buck with hysteretic current regulation
Output current up to 1.5 A DC
Integrated 80 V high-side MOSFET switch with low RON
Hybrid dimming to 0.5% of the target current
Wide operating voltage range 8 V to 80 V
Cycle-by-cycle current limitation
Under-voltage lockout
Thermal protection
Flicker free operation
Digital soft-start
Pull-down transistor to avoid LED glowing


ILD8150 PG-DSO-8
ILD8150E PG-DSO-8 with exposed pad

https://www.infineon.com/dgdl/Infineon-Datasheet_ILD8150_V1.0-DS-v01_00-EN…

XPH3R114MC P Channel -40V power MOSFET SOP from TOSHIBA

Toshiba has launched “XPH3R114MC”, “XPH4R714MC” and “XPN9R614MC” of -40 V P-channel power MOSFETs for automotive use.

XPH3R114MC -40Vds, -100 Ids SOP Advance(WF)
XPH4R714MC -40Vds, -60 Idc SOP Advance(WF)
XPN9R614MC -40Vds -40Idc TSON Advance(WF)


https://toshiba.semicon-storage.com/info/docget.jsp?did=63639&prodName=XPH3R114MC

https://toshiba.semicon-storage.com/info/docget.jsp?did=66018&prodName=XPH4R714MC

https://toshiba.semicon-storage.com/info/docget.jsp?did=65305&prodName=XPN9R614MC

TMC2209-LA Two-Phase Bipolar Stepper Motor Driver QFN28 from TRINAMIC

The TMC2209 is an ultra-silent motor driver IC for two phase stepper motors. TMC2209 pinning is compatible to a number of legacy drivers as well as to the TMC2208.

Voltage Range 4.7 to 29VDC
Low RDSon, Low Heat-Up LS 170mΩ & HS 170mΩ (typ. at 25°C)

TMC2209-LA StealthChop standalone Motor Driver
TMC2209-LA-T StealthChop standalone Motor Driver
TMC2209-EVAL Evaluation board for TMC2209 stepper Motor Driver

https://www.trinamic.com/fileadmin/assets/Products/ICs_Documents/TMC2209_Datasheet_V103.pdf
https://www.trinamic.com/products/integrated-circuits/details/tmc2209-la/

RT7207K USB PD Controller WQFN-24 from Richtek

The RT7207K is a programmable controller with integrated synchronous rectification control. Its internal MCU handles various proprietary protocols via the D+/D- interface and supports USB PD Type-C via the CC1/CC2 pins.

USB PD2.0/PD3.0 and PPS
Embedded MCU with an Mask ROM of 32kB, an OTP-ROM of 8kB, and an SRAM of 2kB
Built-in Synchronous Rectifier Controller and Driver
Built-in Charge Pump for a Wide VDD Operation
Range of 3V to 21V
Built-in Shunt Regulators for Programmable
Constant-Voltage and Constant-Current Control
Built-in 10-bit Analog-to-Digital Converter (ADC)
Programmable Cable Compensation
BLD Pin for Quick Discharge of Output Capacitor
VBUS Pin for Detection VBUS Voltage and
Quick Discharge of VBUS Capacitor
USBP Pin for Direct Drive of External Blocking N-MOSFET
Power-Saving Mode in Standby Mode
WQFN-24L 4x4 (W-Type) Exposed Pad-Option 2

https://www.richtek.com/assets/product_file/RT7207K/DS7207K-00QV.pdf

ATMXT1665TD-A I2C Touchscreen Controller LQFP-144 from Micropchip

The ATMXT1665TD-A Automotive touchscreen controller is aimed at display sizes up to 15”.

ATMXT1665TD-ATRI2CVAO
ATMXT1665TD-ATRSPIVAO
ATMXT1665TD-ATI2CVAO
ATMXT1665TD-ATSPIVAO
ATMXT1665TD-ABI2CVAO
ATMXT1665TD-ABRI2CVAO
ATMXT1665TD-ABRSPIVAO
ATMXT1665TD-ABSPIVAO


https://www.microchip.com/wwwproducts/en/ATMXT1665TD-A
http://ww1.microchip.com/downloads/en/DeviceDoc/00001599G.pdf


ATMXT1189TD-A I2C Touchscreen Controller LQFP-144 from Micropchip

The ATMXT1189TD-A Automotive touchscreen controller is aimed at display sizes up to 13”.



ATMXT1189TD-ATI2CVAOATMXT1189TD-ATSPIVAOATMXT1189TD-ATRI2CVAOATMXT1189TD-ATRSPIVAOATMXT1189TD-ABRI2CVAOATMXT1189TD-ABI2CVAOATMXT1189TD-ABSPIVAOATMXT1189TD-ABRSPIVAO
http://ww1.microchip.com/downloads/en/DeviceDoc/00001599G.pdf


https://www.microchip.com/wwwproducts/en/ATMXT1189TD-A

ATMXT1067TD-A I2C Touchscreen Controller TQFP-128 from Micropchip

The ATMXT1067TD-A Automotive touchscreen controller is aimed at display sizes up to 10.5”


ATMXT1067TD-ATI2CVAO
ATMXT1067TD-ATRI2CVAO
ATMXT1067TD-ABI2CVAO
ATMXT1067TD-ABRI2CVAO

http://ww1.microchip.com/downloads/en/DeviceDoc/mXT1067TD%20Touchscreen%20Controller%20Product%20Datasheet.pdf

https://www.microchip.com/wwwproducts/en/ATMXT1067TD-A

AP7370 Series 300mA Fixed Voltage LDO SOT23-3 from Diodes Inc.

The AP7370 has features of wide input voltage range, high accuracy, low dropout voltage, current limit, reverse current protection, and ultra-low quiescent current which make it ideal for use in various USB and portable devices and instrument application.

The IC consists of a voltage reference, an error amplifier, a resistor network for setting output voltage, a current limit circuit for current protection, and a chip enable circuit. The AP7370 is available in 1.2V, 1.5V, 1.8V, 2.8V, 3.0V, 3.3V, 3.6V and 5.0V fixed output voltage versions.

The AP7370 is available in space-saving SOT23, SOT25, SOT89 and U-DFN2020-6 (Type C) packages.

Wide Input Voltage Range: Up to 18V
Low Dropout Voltage: VDROP = 500mV @ IOUT = 100mA
Low Ground Current
High Output Voltage Accuracy
Compatible with Low ESR Ceramic Capacitor
Excellent Line/Load Regulation



Part NumberPackageOutputAP7370-12W5-7SOT25 5 Pins300mA 1.2V LDOAP7370-15W5-7SOT25 5 Pins300mA 1.5V LDOAP7370-18W5-7SOT25 5 Pins300mA 1.8V LDOAP7370-28…

AL5814QMP-13 60V LED Linear Dimmable LED Driver Controller MSOP-8EP from Diodes Inc.

The AL5814Q is an 8-terminal adjustable linear LED controller offering excellent temperature stability and output current capability. It works with a wide-input voltage range from 4.5V to 60V. With an external LED driving power device, its internal power dissipation is minimized compared with traditional linear LED drivers. This makes it ideal for medium-to-high current automotive LED lighting applications.

Qualified to AEC-Q100 Grade 1
Wide Input Voltage Range from 4.5V to 60V
Configurable LED Current Setting
5% Reference Voltage Tolerance Across OperatingTemperature
Low Temperature Drift
15mA Output Drive Capability for MOSFET or Bipolar Transistor
LED Open Protection Detected by VFAULT Pin
PWM Dimming Realized Through VFAULT Pin
LED Thermal Foldback Configured by VSET
Tthermally enhanced MSOP-8EP package



https://www.diodes.com/assets/Datasheets/AL5814Q.pdf
https://www.diodes.com/products/power-management/led-drivers/linear-led-drivers/part/AL5814Q

LV88551 Single Phase BLDC Motor Driver from ON Semiconductor

These are the pre-driver for a single-phase BLDC motor, which have the closed loop controller for motor rotation speed. These are available to control a motor with low vibration and the low noise. In addition, lead-angle adjustment is possible by external pins. Lead-angle value and lead-angle slant can be adjusted independently. Thus, the device can be driven by high efficiency and low noise with various motors. Motor speed setting curve is adjustable with using external resistor only. As a method of the rotary speed control of the motor, direct-PWM pulse input.

Features
Single−phase Full Wave Drive Pre−driver Include Closed Loop Speed Control
Speed Control Function by PWM Duty Input (25 Hz to 100 kHz)
Built−in Current Limit Circuit and Thermal Protection Circuit
Built−in Locked Rotor Protection and Auto Recovery Circuit
Lineup of Different Closed Loop Gain Selection

LV88551JA-AH SSOP-20J LV88552JA-AH SSOP-20J LV88553JA-AH SSOP-20J LV88554JA-AH SSOP-20J LV88551RTXG VCT-20 LV88552RTXG …

BlueNRG-M2 Application Processor Module for Bluetooth from ST Microelectronics

The BlueNRG-M2 is a Bluetooth® low energy system-on-chip application processor certified module, compliant with BT specifications v5.0 and BQE qualified. The BlueNRG-M2 module supports multiple roles simultaneously and can act at the same time as Bluetooth master and slave device. The BlueNRG-M2 is based on the BlueNRG-2 system-on-chip and entire Bluetooth low energy stack and protocols are embedded into module. The BlueNRG-M2 module provides a complete RF platform in a tiny form factor. Radio, embedded antenna and high frequency oscillators are integrated to offer a certified solution to optimize the time-to-market of the final applications. The BlueNRG-M2 can be powered directly with a pair of AAA batteries or any power source from 1.7 to 3.6 V.
Part number BLUENRG-M2SA, BLUENRG-M2SP
Features
Bluetooth v5.0 compliant
Embedded ST BlueNRG-2 BLE SoC
Small form factor: 11.5 mm x13.5 mm
AES secutity co-processor
Operating supply voltage: from 1.7 to 3.6 V
Operating temperature range: -40…

AIS2DW12TR MEMS 3 Axis Accelerometer Digital output Motion sensor LGA-12 from ST Microelectronics

The AIS2DW12 is an ultra-low-power three-axis linear accelerometer which leverages on the robust and mature manufacturing processes already used for the production of micromachined accelerometers and designed to address nonsafety automotive applications.

Features
Supply voltage, 1.62 V to 3.6 V
AEC-Q100 qualified
3-axis accelerometer
High-speed I²C/SPI digital output interface
2 independent programmable interrupts
16-bit data output
LGA (2x2x0.93 mm³) with 12 Pins

https://www.st.com/resource/en/datasheet/ais2dw12.pdf

Nordic Thingy: 91 Multi-sensor cellular IoT Prototyping kit

The Nordic Thingy:91 is an easy-to-use battery-operated prototyping platform for cellular IoT using LTE-M, NB-IoT and GPS. It is ideal for creating Proof-of-Concept (PoC), demos and initial prototypes in your cIoT development phase.
NRF6943  Nordic Thingy:91 is as Multi-sensor cellular IoT prototyping kit supporting LTE-M, NB-IoT, GPS and Bluetooth Low Energy.
The Nordic Thingy:91 is the ideal way to kickstart your cellular IoT project using the nRF9160 SiP. Thingy:91 is equipped with a broad collection of diverse sensors and interfaces that make it highly adaptable to rapid prototyping and getting your proof of concept off the ground in no time at all.

        Key features
•Battery-operated prototyping platform for the nRf9160 SiP
•700-900 MHz + 1710-2200 MHz LTE band support
•Certifications: CE, FCC
•nRF52840 multiprotocol SoC on board
•LTE-M/NB-IoT/GPS antennas
•Nano/4FF SIM card slot
•User-programmable button and RGB LEDs
•Environmental sensor for temp, humidity, air quality and a…