Broadcom New BCM8956X Automotive Multilayer Ethernet Switches

Broadcom launched the BCM8956X, a family of automotive multilayer Ethernet switches, designed to address the growing need for bandwidth, flexibility, security and time-sensitive networking (TSN) for autonomous and connected vehicles. In addition, Broadcom has begun shipping production quantities of its automotive 1000BASE-T1 PHY transceiver device, the BCM8988X, enabling automotive OEMs to immediately deploy Gigabit Ethernet on single-pair UTP cables for in-car networking applications.

The BCM8956X includes highly-optimized switches in various port configurations with integrated 100BASE-T1 and 1000BASE-T1 PHYs, allowing customers to have scalable and cost-effective designs for automotive gateway, ADAS and infotainment applications. The integrated PCIe interface provides high bandwidth connectivity to the host processor, while the on-chip Layer 3 flow accelerator offloads the host processor from compute intensive routing operations. Furthermore, the BCM8956X is packed with advanced multilevel security features including dedicated hardware security module (HSM) block for line rate encryption, L2 anti-hack, deep packet inspection, and intrusion prevention reporting.

Source:
https://www.broadcom.com/company/news/product-releases/2392007

https://www.broadcom.com/products/ethernet-connectivity/automotive-switches/bcm8956x

Comments

Microchip New SAMV71Q21RT, SAMRH71 Radiation-Tolerant and Radiation-Hardened Arm® MCU

Microchip introduced the space industry’s first Arm®-based microcontrollers (MCUs) that combine the low-cost and large ecosystem benefits of Commercial Off-the-Shelf (COTS) technology with space-qualified versions that have scalable levels of radiation performance. Based on the automotive-qualified SAMV71, the SAMV71Q21RT radiation-tolerant and SAMRH71 radiation-hardened MCUs implement the widely deployed Arm® Cortex®-M7 System on Chip (SoC), enabling more integration, cost reduction and higher performance in space systems. SAMV71Q21RT is the radiation tolerant version of the popular Microchip SAMV71Q21. This space-qualified version of the product adds: Ceramic & hermetic package, extended temperature range -40C to 125C, extended qualification flow according to QML-V or QML-Q space grade flow. Radiation performance for the SAMV71Q21RT: SEL LET > 60 MeV.cm2/mg (at 125C), and TID up to 20 Krad (Si). SAMRH71 is the Radiation-Hardened-By-Design (RHBD) version of the popular M

Arduino ASX00003 MKR Motor Carrier Board

The MKR Motor Carrier is an MKR add-on board designed to control servo, DC, and stepper motors. The Carrier can also be used to connect other actuators and sensors via a series of 3-pin male headers. for more details please click this link https://store.arduino.cc/usa/mkr-motor-carrier ASX00003 MKR Motor Carrier The summary of features is shown below: 1. Compatible with all the boards in the MKR family 2. Four servo motor outputs 3. Four DC motor outputs (two high performance + two standard performance) 4. Sensing of current feedback for the high-performance motors 5. Two inputs for encoder sensors 6. Four inputs for analog sensors (3-pin compatible) 7. Possibility to read the status of the batteries 8. ON-OFF switch with Power ON LED 9. LiPo battery connector (2S or 3S compatible) and power terminal block for alternative power source 10. LEDs to visually indicate the direction of the rotation of t

IDT New SPD Hub IC for DDR5 Server Memory Modules

IDT introduced the industry’s first integrated Serial Presence Detect (SPD), temperature sensor and control plane hub component (referred to as “SPD Hub”) developed for DDR5-based Dual In-Line Memory Modules (DIMM). The IDT® SPD Hub is designed to provide a space and power efficient solution that enables control plane operation at significantly higher speeds than previous system management buses with enhanced reliability. DDR5 memory is projected to double the bandwidth of DDR4, and as with previous generations of DDR memory, IDT’s devices are leading the market in performance and reliability. IDT’s DDR5 PMIC enables the next generation of server DIMM solutions to efficiently scale to greater performance, density and reliability while reducing overall system power. IDT’s SPD Hub significantly increases the system management bus performance by eliminating the bottlenecks of traditional system management buses. The DDR5 RCD, PMIC, SPD Hub and TS devices are used in RDIMM, LRDIM

New Silicons and Electronics

Search This Blog