New Silicons and Electronics

Built-in Speed Control, 3 Hall Sensors Three-Phase Brushless Motor Driver BM62380MUV is sine wave driver IC for three-phase brushless motor driver with 40 V power supply voltage rating and 2.0 A output current rating. It detects the rotor position by 3 Hall sensors. In addition, it has a speed feedback control function, and controls output PWM Duty by adjusting the rotational frequency characteristics for the input PWM signal and the rotational frequency affected from motor. Operating Supply Voltage Range: 8 V to 28 V Output current rating: 2.0 A Output ON Resistance (top & bottom total): 0.6 Ω (Typ) Output PWM Frequency: 40 kHz (Typ) Standby Current: 0.6 mA (Typ) Operating Temperature Range: -40 °C to +85 °C Package  VQFN040V6060 6.00 mm x 6.00 mm x 1.00 mm https://www.rohm.com/datasheet/BM62380MUV/bm62380muv-e

3 Hall Sensors Three-Phase Brushless Motor Pre-Driver BM64300MUV is the pre-driver IC of sine wave drive for three-phase brushless motor driver that supports 48 V power supply controlling the motor driver constructed in external FETs. It detects a rotor position by 3 Hall sensors. In addition, silent and low vibration operations are implemented by making the output current a sine waveform. Operating Supply Voltage Range : 28 V to 63 V Output PWM Frequency : 40 kHz (Typ) Standby Current : 1.2 mA (Typ) Operating Temperature Range : -40 °C to +105 °C Package VQFN032V5050 5.00 mm x 5.00 mm x 1.00 mm https://www.rohm.com/datasheet/BM64300MUV/bm64300muv-e

Built-in Speed Control, 3 Hall Sensors Three-Phase Brushless Motor Pre-Drive BM62351MUV is the pre-driver IC of sine wave drive for three-phase brushless motor driver that supports 24 V power supply controlling the motor driver constructed in external FETs. It detects a rotor position by 3 Hall sensors. In addition, it has a speed feedback control function, and controls output PWM Duty by adjusting the rotational frequency characteristics for the input CLKIN signal and the rotational frequency affected from motor. Operating Supply Voltage Range : 8 V to 28 V Output PWM Frequency : 40 kHz (Typ) Standby Current : 0.6 mA (Typ) Operating Temperature Range : -40 °C to +105 °C Package VQFN032V5050 5.00 mm x 5.00 mm x 1.00 mm https://www.rohm.com/datasheet/BM62351MUV/bm62351muv-e

Built-in Speed Control, 3 Hall Sensors Three-Phase Brushless Motor Pre-Driver BM62350MUV is the pre-driver IC of sine wave drive for three-phase brushless motor driver that supports 24 V power supply controlling the motor driver constructed in external FETs. It detects a rotor position by 3 Hall sensors. In addition, it has a speed feedback control function, and controls output PWM Duty by adjusting the rotational frequency characteristics for the input PWM signal and the rotational frequency affected from motor. Operating Supply Voltage Range : 8 V to 28 V Output PWM Frequency : 40 kHz (Typ) Standby Current : 0.6 mA (Typ) Operating Temperature Range : -40 °C to +105 °C Package  VQFN032V5050 5.00 mm x 5.00 mm x 1.00 mm https://www.rohm.com/datasheet/BM62350MUV/bm62350muv-e

The TMC2209 is an ultra-silent motor driver IC for two phase stepper motors. TMC2209 pinning is compatible to a number of legacy drivers as well as to the TMC2208. Voltage Range 4.7 to 29VDC Low RDSon, Low Heat-Up LS 170mΩ & HS 170mΩ (typ. at 25°C) TMC2209-LA StealthChop standalone Motor Driver TMC2209-LA-T StealthChop standalone Motor Driver TMC2209-EVAL Evaluation board for TMC2209 stepper Motor Driver https://www.trinamic.com/fileadmin/assets/Products/ICs_Documents/TMC2209_Datasheet_V103.pdf https://www.trinamic.com/products/integrated-circuits/details/tmc2209-la/

These are the pre-driver for a single-phase BLDC motor, which have the closed loop controller for motor rotation speed. These are available to control a motor with low vibration and the low noise. In addition, lead-angle adjustment is possible by external pins. Lead-angle value and lead-angle slant can be adjusted independently. Thus, the device can be driven by high efficiency and low noise with various motors. Motor speed setting curve is adjustable with using external resistor only. As a method of the rotary speed control of the motor, direct-PWM pulse input. Features Single−phase Full Wave Drive Pre−driver Include Closed Loop Speed Control Speed Control Function by PWM Duty Input (25 Hz to 100 kHz) Built−in Current Limit Circuit and Thermal Protection Circuit Built−in Locked Rotor Protection and Auto Recovery Circuit Lineup of Different Closed Loop Gain Selection LV88551JA-AH SSOP-20J LV88552JA-AH SSOP-20J LV88553JA-AH SSOP-20J LV88554JA-AH SSOP-20J LV88551RTXG ...

These are microcontroller driven multifunctional actuator driver for automotive applications. Up to five DC motors and five grounded resistive loads can be driven with six half bridges and five high-side drivers. The integrated SPI controls all operating modes (forward, reverse, brake and high impedance). Also all diagnostic information is available via SPI read. L99MOD50XP  5 DC Motors Driver L99MOD51XP 2 DC Motors Driver L99MOD53XP 3 DC Motors Driver L99MOD54XP  2 DC Motors Driver L99MOD50XPTR https://www.st.com/resource/en/datasheet/l99mod50xp.pdf L99MOD51XPTR https://www.st.com/resource/en/datasheet/l99mod51xp.pdf L99MOD53XPTR  https://www.st.com/resource/en/datasheet/l99mod53xp.pdf L99MOD54XPTR  https://www.st.com/resource/en/datasheet/l99mod54xp.pdf https://www.st.com/en/automotive-analog-and-power/multi-output-driver.html#overview

The TMCM-6214 is a 6-axes motor controller/driver board for 2-phase bipolar stepper motors with up-to 1.9A RMS motor current and +24V supply. The motion controllers support 6-point ramps in addition to linear ramps in hardware. 3 encoder inputs for incremental a/b/n encoders are included. For communication either CAN, RS485, RS232 or USB may be selected. In addition, there are 6 general purpose digital inputs, 2 analog inputs and 8 general purpose outputs (protected). Two STO inputs are available together with an intergated power supply switch for the driver supply. TMCM-6214-TMCL 6-axes bipolar stepper motor controller/driver, upto 2A RMS motor current, 24V nom. supply, 3x encoder inputs, 2 analog inputs, 6 digital inputs, 8 OD outputs, CAN, RS485, RS232 and USB interfaces, STO, TMCL TMCM-6214-CANopen 6-axes bipolar stepper motor controller/driver, upto 2A RMS motor current, 24V nom. supply, 3x encoder inputs, 2 analog inputs, 6 digital inputs, 8 OD outputs, CAN, RS485, R...

Toshiba Electronics Europe GmbH has started sample shipments of an automotive DC motor driver IC with a LIN (Local Interconnect Network) slave function that can communicate with a LIN 2.0 master IC for in-vehicle networks. The new TB9058FNG is suitable for many applications requiring up to 0.3A drive current using LIN BUS including heating, ventilation and air conditioning (HVAC) damper control drivers. One significant advantage of the new driver is that no software development is required, as the IC incorporates the hardware logic of a single-channel H-bridge motor driver and LIN communication function with an enhanced checksum. The integration of the enhanced checksum function allows the LIN 1.3 compliant TB9058FNG to communicate with a LIN 2.0 compliant master IC.  The TB9058FNG receives the position data from the motor rotation target via the external LIN BUS, and drives the motor to the rotation target. A variety of communication rates up to 19,200 bps are easily selected in ...