MAX77654AENVN+T Ultra-Low Power PMIC Featuring Single Inductor WLP-30 from Maxim

The MAX77654 provides highly-integrated battery charging and power supply solutions for low-power applications where size and efficiency are critical. The IC features a SIMO buck-boost regulator that provides three independently programmable power rails from a single inductor to minimize total solution size. Two 100mA LDOs provide ripple rejection for audio and other noise-sensitive applications. The LDOs can also be configured as load switches to manage power consumption by disconnecting external blocks when not required. A highly-configurable linear charger supports a wide range of Li+ battery capacities and includes battery temperature monitoring for additional safety (JEITA).

Benefits and Features
3x Output, Single-Inductor Multiple-Output (SIMO) Buck-Boost Regulator
2x 100mA LDO/LSW
Smart Power Selector™ Li+/Li-Poly Charger
3x GPIO Resources
Analog MUX Output for Power Monitoring
6μA Operating Current (3 SIMO Channels + 2 LDOs)
6.52mm2 Wafer-Level Package (WLP-30)
-40°C to +85°C Operating temperature range

MAX77654ENV+T :
MAX77654AENV+T
MAX77654BENV+T
MAX77654CENV+T
MAX77654MENV+T
MAX77654ENVN+T
MAX77654AENVN+T

MAX77654EVKIT# : Evaluation Kit

https://www.mouser.co.uk/_/?Keyword=MAX77654EVKIT%23

https://datasheets.maximintegrated.com/en/ds/MAX77654.pdf

Comments

Microchip New SAMV71Q21RT, SAMRH71 Radiation-Tolerant and Radiation-Hardened Arm® MCU

Microchip introduced the space industry’s first Arm®-based microcontrollers (MCUs) that combine the low-cost and large ecosystem benefits of Commercial Off-the-Shelf (COTS) technology with space-qualified versions that have scalable levels of radiation performance. Based on the automotive-qualified SAMV71, the SAMV71Q21RT radiation-tolerant and SAMRH71 radiation-hardened MCUs implement the widely deployed Arm® Cortex®-M7 System on Chip (SoC), enabling more integration, cost reduction and higher performance in space systems. SAMV71Q21RT is the radiation tolerant version of the popular Microchip SAMV71Q21. This space-qualified version of the product adds: Ceramic & hermetic package, extended temperature range -40C to 125C, extended qualification flow according to QML-V or QML-Q space grade flow. Radiation performance for the SAMV71Q21RT: SEL LET > 60 MeV.cm2/mg (at 125C), and TID up to 20 Krad (Si). SAMRH71 is the Radiation-Hardened-By-Design (RHBD) version of...

Nordic Thingy: 91 Multi-sensor cellular IoT Prototyping kit

The Nordic Thingy:91 is an easy-to-use battery-operated prototyping platform for cellular IoT using LTE-M, NB-IoT and GPS. It is ideal for creating Proof-of-Concept (PoC), demos and initial prototypes in your cIoT development phase. NRF6943 Nordic Thingy:91 is as Multi-sensor cellular IoT prototyping kit supporting LTE-M, NB-IoT, GPS and Bluetooth Low Energy. The Nordic Thingy:91 is the ideal way to kickstart your cellular IoT project using the nRF9160 SiP. Thingy:91 is equipped with a broad collection of diverse sensors and interfaces that make it highly adaptable to rapid prototyping and getting your proof of concept off the ground in no time at all. Nordic Thingy:91 Key features • Battery-operated prototyping platform for the nRf9160 SiP • 700-900 MHz + 1710-2200 MHz LTE band support • Certifications: CE, FCC • nRF52840 multiprotocol SoC on board • LTE-M/NB-IoT/GPS antennas • Nano/4FF SIM card slot • User-programmable button a...

Arduino ASX00003 MKR Motor Carrier Board

The MKR Motor Carrier is an MKR add-on board designed to control servo, DC, and stepper motors. The Carrier can also be used to connect other actuators and sensors via a series of 3-pin male headers. for more details please click this link https://store.arduino.cc/usa/mkr-motor-carrier ASX00003 MKR Motor Carrier The summary of features is shown below: 1. Compatible with all the boards in the MKR family 2. Four servo motor outputs 3. Four DC motor outputs (two high performance + two standard performance) 4. Sensing of current feedback for the high-performance motors 5. Two inputs for encoder sensors 6. Four inputs for analog sensors (3-pin compatible) 7. Possibility to read the status of the batteries 8. ON...

New Silicons and Electronics

Search This Blog