AP2205 Series 200mA LDO Regulator from Diodes Inc.

The AP2205 series is a positive voltage regulator IC fabricated by high voltage EPNP process.
The AP2205 has features of wide input voltage range, high accuracy, high ripple rejection, low dropout voltage, low noise, current limit and ultra-low quiescent current which make it ideal for use in various USB and portable devices.
The IC consists of a voltage reference, an error amplifier, a resistor network for setting output voltage, a current limit circuit for current protection, and a chip enable circuit, a low power shutdown mode for extended battery life, over current protection, over temperature protection, as well as reversed-battery protection.
The AP2205 has 1.5V, 1.8V, 2.5V, 2.8V, 3.0V, 3.3V, 5.0V fixed voltage versions and adjustable voltage version.
The AP2205 is available in space-saving SOT25 and SOT89 packages.

AP2205-33Y-13 LDO 3.3V 200mA SOT89-4
AP2205-33Y-13 LDO 3.3V 200mA SOT89-4
AP2205-33YR-13 LDO 3.3V 200mA SOT89-4
AP2205-50Y-13 LDO 5V 200mA SOT89-4
AP2205-50Y-13 LDO 5V 200mA SOT89-4
AP2205-W5-7 LDO Adjustable 200mA SOT25-5
AP2205-W5-7 LDO Adjustable 200mA SOT25-5

https://www.diodes.com/assets/Datasheets/AP2205.pdf

https://www.diodes.com/products/power-management/low-dropout-regulators/part/AP2205#tab-overview

Comments

Microchip New SAMV71Q21RT, SAMRH71 Radiation-Tolerant and Radiation-Hardened Arm® MCU

Microchip introduced the space industry’s first Arm®-based microcontrollers (MCUs) that combine the low-cost and large ecosystem benefits of Commercial Off-the-Shelf (COTS) technology with space-qualified versions that have scalable levels of radiation performance. Based on the automotive-qualified SAMV71, the SAMV71Q21RT radiation-tolerant and SAMRH71 radiation-hardened MCUs implement the widely deployed Arm® Cortex®-M7 System on Chip (SoC), enabling more integration, cost reduction and higher performance in space systems. SAMV71Q21RT is the radiation tolerant version of the popular Microchip SAMV71Q21. This space-qualified version of the product adds: Ceramic & hermetic package, extended temperature range -40C to 125C, extended qualification flow according to QML-V or QML-Q space grade flow. Radiation performance for the SAMV71Q21RT: SEL LET > 60 MeV.cm2/mg (at 125C), and TID up to 20 Krad (Si). SAMRH71 is the Radiation-Hardened-By-Design (RHBD) version of the popular M

Arduino ASX00003 MKR Motor Carrier Board

The MKR Motor Carrier is an MKR add-on board designed to control servo, DC, and stepper motors. The Carrier can also be used to connect other actuators and sensors via a series of 3-pin male headers. for more details please click this link https://store.arduino.cc/usa/mkr-motor-carrier ASX00003 MKR Motor Carrier The summary of features is shown below: 1. Compatible with all the boards in the MKR family 2. Four servo motor outputs 3. Four DC motor outputs (two high performance + two standard performance) 4. Sensing of current feedback for the high-performance motors 5. Two inputs for encoder sensors 6. Four inputs for analog sensors (3-pin compatible) 7. Possibility to read the status of the batteries 8. ON-OFF switch with Power ON LED 9. LiPo battery connector (2S or 3S compatible) and power terminal block for alternative power source 10. LEDs to visually indicate the direction of the rotation of t

IDT New SPD Hub IC for DDR5 Server Memory Modules

IDT introduced the industry’s first integrated Serial Presence Detect (SPD), temperature sensor and control plane hub component (referred to as “SPD Hub”) developed for DDR5-based Dual In-Line Memory Modules (DIMM). The IDT® SPD Hub is designed to provide a space and power efficient solution that enables control plane operation at significantly higher speeds than previous system management buses with enhanced reliability. DDR5 memory is projected to double the bandwidth of DDR4, and as with previous generations of DDR memory, IDT’s devices are leading the market in performance and reliability. IDT’s DDR5 PMIC enables the next generation of server DIMM solutions to efficiently scale to greater performance, density and reliability while reducing overall system power. IDT’s SPD Hub significantly increases the system management bus performance by eliminating the bottlenecks of traditional system management buses. The DDR5 RCD, PMIC, SPD Hub and TS devices are used in RDIMM, LRDIM

New Silicons and Electronics

Search This Blog