Skip to main content

Si83401AAA-IF Isolated Smart Switch DFN-32 from Silicon Labs

The Si834 Isolated Smart Switch DFN-32
The Si834x provides up to four isolated high-side or low-side switches with low RON. These switches are ideal for driving resistive and inductive loads like solenoids, relays, and lamps commonly found in industrial control systems like programmable logic controllers (PLC). Each switch is galvanically isolated for safety using Silicon Labs’ groundbreaking CMOS based isolation technology offering better reliability and performance than traditional optocoupler based isolation, including high common-mode transient immunity (CMTI) of over 150 kV/┬Ás

High-side or low-side switch options
Logic Supply: 2.25 V – 5.5 V
Switch Supply: 9 V – 32 V
5kV ESD Protection
-40˚C to 125 ˚C operating temperature range
Inrush current tolerance: 7 A for 20 ms
Compact 9 x 9 DFN-32 package

Part Number          Description
Si83401AAA-IF Isolated Smart Switch, 1 Channel, Sourcing, Parallel
Si83401AAA-IFR Isolated Smart Switch, 1 Channel, Sourcing, Parallel
Si83401ABA-IF Isolated Smart Switch, 1 Channel, Sourcing, Parallel
Si83401ABA-IFR Isolated Smart Switch, 1 Channel, Sourcing, Parallel
Si83402AAA-IF Isolated Smart Switch, 2 Channel, Sourcing, Parallel
Si83402AAA-IFR Isolated Smart Switch, 2 Channel, Sourcing, Parallel
Si83404AAA-IF Isolated Smart Switch, 4 Channel, Sourcing, Parallel
Si83404AAA-IFR Isolated Smart Switch, 4 Channel, Sourcing, Parallel
Si83405ADA-IF Isolated Smart Switch, 1 Channel, Sourcing, SPI
Si83405ADA-IFR Isolated Smart Switch, 1 Channel, Sourcing, SPI
Si83408ADA-IF Isolated Smart Switch, 4 Channel, Sourcing, SPI
Si83408ADA-IFR Isolated Smart Switch, 4 Channel, Sourcing, SPI
Si83408AFA-IF Isolated Smart Switch, 4 Channel, Sourcing, Parallel/SPI
Si83408AFA-IFR Isolated Smart Switch, 4 Channel, Sourcing, Parallel/SPI
Si83411AAA-IF Isolated Smart Switch, 1 Channel, Sinking, Parallel
Si83411AAA-IFR Isolated Smart Switch, 1 Channel, Sinking, Parallel
Si83411ABA-IF Isolated Smart Switch, 1 Channel, Sinking, Parallel
Si83411ABA-IFR Isolated Smart Switch, 1 Channel, Sinking, Parallel
Si83412AAA-IF Isolated Smart Switch, 2 Channel, Sinking, Parallel
Si83412AAA-IFR Isolated Smart Switch, 2 Channel, Sinking, Parallel
Si83414AAA-IF Isolated Smart Switch, 4 Channel, Sinking, Parallel
Si83414AAA-IFR Isolated Smart Switch, 4 Channel, Sinking, Parallel
Si83415ADA-IF Isolated Smart Switch, 1 Channel, Sinking, SPI
Si83415ADA-IFR Isolated Smart Switch, 1 Channel, Sinking, SPI
Si83418ADA-IF Isolated Smart Switch, 4 Channel, Sinking, SPI
Si83418ADA-IFR Isolated Smart Switch, 4 Channel, Sinking, SPI
Si83418AFA-IF Isolated Smart Switch, 4 Channel, Sinking, Parallel/SPI
Si83418AFA-IFR Isolated Smart Switch, 4 Channel, Sinking, Parallel/SPI

Si83404AAA-KIT Evaluation Board
Si83414AAA-KIT Evaluation Board

for more details
https://www.mouser.com/_/?Keyword=Si83401AAA-IF
https://www.mouser.com/_/?Keyword=Si83414AAA-KIT

https://uk.farnell.com/silicon-labs/Si83401AAA-IF/isolators-drivers-interfaces-ic/dp/3226557

https://www.arrow.com/en/products/si83401aaa-if/silicon-labs



Comments

Popular posts from this blog

Nordic Thingy: 91 Multi-sensor cellular IoT Prototyping kit

The Nordic Thingy:91 is an easy-to-use battery-operated prototyping platform for cellular IoT using LTE-M, NB-IoT and GPS. It is ideal for creating Proof-of-Concept (PoC), demos and initial prototypes in your cIoT development phase.
NRF6943  Nordic Thingy:91 is as Multi-sensor cellular IoT prototyping kit supporting LTE-M, NB-IoT, GPS and Bluetooth Low Energy.
The Nordic Thingy:91 is the ideal way to kickstart your cellular IoT project using the nRF9160 SiP. Thingy:91 is equipped with a broad collection of diverse sensors and interfaces that make it highly adaptable to rapid prototyping and getting your proof of concept off the ground in no time at all.

        Key features
•Battery-operated prototyping platform for the nRf9160 SiP
•700-900 MHz + 1710-2200 MHz LTE band support
•Certifications: CE, FCC
•nRF52840 multiprotocol SoC on board
•LTE-M/NB-IoT/GPS antennas
•Nano/4FF SIM card slot
•User-programmable button and RGB LEDs
•Environmental sensor for temp, humidity, air quality and a…

ON Semi RSL10-SOLARSENS-GEVK, RSL10 Solar Cell Multi-Sensor Platform

ON Semiconductor driving energy efficient innovations, continues to enable battery-less and maintenance-free IoT with the introduction of its RSL10 Multi-Sensor Platform powered solely with a solar cell. This complete solution supports the development of IoT sensors using continuous solar energy harvesting to gather and communicate data through Bluetooth® Low Energy, without the need for batteries or other forms of non-renewable energy.
The RSL10 Solar Cell Multi-Sensor platform is a complete, low-cost solution for developing self-powered sensor nodes using harvested solar energy. Based on the RSL10 SIP- the industry's lowest power Bluetooth ® 5 radio, the RSL10 Solar Cell Multi-Sensor platform supports continuous Bluetooth Low Energy transmission of sensor information without requiring any batteries. The fully-integrated platform features multiple smart sensors, an ultra-low quiescent current LDO regulator (NCP170), and a 2-port connector for the provided solar cell (FlexRB-25-70…

Arduino ASX00003 MKR Motor Carrier Board

The MKR Motor Carrier is an MKR add-on board designed to control servo, DC, and stepper motors. The Carrier can also be used to connect other actuators and sensors via a series of 3-pin male headers.

for more details please click this link  https://store.arduino.cc/usa/mkr-motor-carrier


The summary of features is shown below:

1.Compatible with all the boards in the MKR family 2.Four servo motor outputs 3.Four DC motor outputs (two high performance + two standard performance) 4.Sensing of current feedback for the high-performance motors 5.Two inputs for encoder sensors 6.Four inputs for analog sensors (3-pin compatible) 7.Possibility to read the status of the batteries 8.ON-OFF switch with Power ON LED 9.LiPo battery connector (2S or 3S compatible) and power terminal block for alternative power source 10.LEDs to visually indicate the direction of the rotation of the DC motors.
Source https://store.arduino.cc/usa/mkr-motor-carrier