Skip to main content

MAX25610BAUE/V+ Buck and Buck-Boost LED Driver, 2.2MHz, TSSOP-16 from Maxim

The MAX25610A/MAX25610B are fully synchronous LED drivers that provide constant output current to drive high-power LEDs.
The MAX25610A/MAX25610B integrate two 60mΩ power MOSFETs for synchronous operation, minimizing external components. Flexible configuration supports buck, inverting buck-boost, and boost conversion. The devices incorporate current-mode control that provides fast transient response and eases loop stabilization.

The MAX25610A/MAX25610B include cycle by cycle current limiting, output overvoltage protection (OVP), open-string protection, output short-circuit protection (SCP), and thermal shutdown.

Automotive Ready: AEC-Q100 Qualified
Wide input Voltage Range from 5V to 36V in Buck-Boost LED Driver Applications
Analog and PWM Dimming
Buck LED Driver for 1-to-2 LEDs When Operating of Automotive Battery Applications
Inverting Buck-Boost LED Driver for 3-to-5 LEDs When Operating from Automotive Battery Applications
-40°C to +125°C Operating Temperature Range

MAX25610AAUE/V+ Buck and Buck-Boost LED Driver, 400kHz, TSSOP-16
MAX25610BAUE/V+ Buck and Buck-Boost LED Driver, 2.2MHz, TSSOP-16
MAX25610AATE/VY+ Buck and Buck-Boost LED Driver, 400kHz, TQFN-16
MAX25610BATE/VY+ Buck and Buck-Boost LED Driver, 2.2MHz, TQFN-16
MAX25610AAUE+ Buck and Buck-Boost LED Driver, 400kHz, TSSOP-16
MAX25610BAUE+ Buck and Buck-Boost LED Driver, 2.2MHz, TSSOP-16
MAX25610AATEY+ Buck and Buck-Boost LED Driver, 400kHz, TQFN-16
MAX25610BATEY+ Buck and Buck-Boost LED Driver, 2.2MHz, TQFN-16

MAX25610EVKIT#  Evaluation Kit

For details click below

https://www.mouser.co.uk/_/?Keyword=MAX25610AAUE%2FV%2B
https://uk.farnell.com/search?st=MAX25610
https://www.mouser.co.uk/datasheet/2/256/MAX25610A-MAX25610B-1595384.pdf
https://www.mouser.co.uk/datasheet/2/256/MAX25610EVKIT-1595393.pdf

Labels

Labels:

Comments

Post a Comment

Popular posts from this blog

Microchip New SAMV71Q21RT, SAMRH71 Radiation-Tolerant and Radiation-Hardened Arm® MCU

Microchip introduced the space industry’s first Arm®-based microcontrollers (MCUs) that combine the low-cost and large ecosystem benefits of Commercial Off-the-Shelf (COTS) technology with space-qualified versions that have scalable levels of radiation performance. Based on the automotive-qualified SAMV71, the SAMV71Q21RT radiation-tolerant and SAMRH71 radiation-hardened MCUs implement the widely deployed Arm® Cortex®-M7 System on Chip (SoC), enabling more integration, cost reduction and higher performance in space systems. SAMV71Q21RT is the radiation tolerant version of the popular Microchip SAMV71Q21. This space-qualified version of the product adds:  Ceramic & hermetic package, extended temperature range -40C to 125C, extended qualification flow according to QML-V or QML-Q space grade flow.  Radiation performance for the SAMV71Q21RT:  SEL LET > 60 MeV.cm2/mg (at 125C), and TID up to 20 Krad (Si). SAMRH71 is the Radiation-Hardened-By-Design (RHBD) version of...
Post a Comment
Read more

Nordic Thingy: 91 Multi-sensor cellular IoT Prototyping kit

The Nordic Thingy:91 is an easy-to-use battery-operated prototyping platform for cellular IoT using LTE-M, NB-IoT and GPS. It is ideal for creating Proof-of-Concept (PoC), demos and initial prototypes in your cIoT development phase. NRF6943  Nordic Thingy:91 is as Multi-sensor cellular IoT prototyping kit supporting LTE-M, NB-IoT, GPS and Bluetooth Low Energy. The Nordic Thingy:91 is the ideal way to kickstart your cellular IoT project using the nRF9160 SiP. Thingy:91 is equipped with a broad collection of diverse sensors and interfaces that make it highly adaptable to rapid prototyping and getting your proof of concept off the ground in no time at all. Nordic Thingy:91         Key features • Battery-operated prototyping platform for the nRf9160 SiP • 700-900 MHz + 1710-2200 MHz LTE band support • Certifications: CE, FCC • nRF52840 multiprotocol SoC on board • LTE-M/NB-IoT/GPS antennas • Nano/4FF SIM card slot • User-programmable button a...
1 comment
Read more

Arduino ASX00003 MKR Motor Carrier Board

The MKR Motor Carrier is an MKR add-on board designed to control servo, DC, and stepper motors. The Carrier can also be used to connect other actuators and sensors via a series of 3-pin male headers. for more details please click this link   https://store.arduino.cc/usa/mkr-motor-carrier ASX00003 MKR Motor Carrier The summary of features is shown below: 1.       Compatible with all the boards in the MKR family 2.       Four servo motor outputs 3.       Four DC motor outputs (two high performance + two standard performance) 4.       Sensing of current feedback for the high-performance motors 5.       Two inputs for encoder sensors 6.       Four inputs for analog sensors (3-pin compatible) 7.       Possibility to read the status of the batteries 8.       ON...
1 comment
Read more