STR485ELVQT RS485 Compatible Differential Line Transceiver DFN10 from ST Microelectronics

The STR485E is a low power differential line transceiver for data transmission standard RS485 applications in half-duplex mode. Data and enable signals are compatible with 1.8V or 3.3V supplies.

Two speeds are selectable through SLR pin: fast data rate up to 20 Mbps or slow data rate for extended cable running to 250 kbps.
Excessive power dissipation caused by bus contention or faults is prevented by thermal shutdown circuit that forces the driver outputs into a high impedance state. The receiver has a fail-safe feature, which guarantees a high output state when the inputs are left open, shorted or idle.

https://www.st.com/resource/en/datasheet/str485e.pdf

Comments

Microchip New SAMV71Q21RT, SAMRH71 Radiation-Tolerant and Radiation-Hardened Arm® MCU

Microchip introduced the space industry’s first Arm®-based microcontrollers (MCUs) that combine the low-cost and large ecosystem benefits of Commercial Off-the-Shelf (COTS) technology with space-qualified versions that have scalable levels of radiation performance. Based on the automotive-qualified SAMV71, the SAMV71Q21RT radiation-tolerant and SAMRH71 radiation-hardened MCUs implement the widely deployed Arm® Cortex®-M7 System on Chip (SoC), enabling more integration, cost reduction and higher performance in space systems. SAMV71Q21RT is the radiation tolerant version of the popular Microchip SAMV71Q21. This space-qualified version of the product adds: Ceramic & hermetic package, extended temperature range -40C to 125C, extended qualification flow according to QML-V or QML-Q space grade flow. Radiation performance for the SAMV71Q21RT: SEL LET > 60 MeV.cm2/mg (at 125C), and TID up to 20 Krad (Si). SAMRH71 is the Radiation-Hardened-By-Design (RHBD) version of...

STM32G031 32-Bit ARM Cortex-M0+ Microcontrollers from STMicroelectronics

The STM32G031x4/x6/x8 mainstream microcontrollers are based on high-performance Arm® Cortex®-M0+ 32-bit RISC core operating at up to 64 MHz frequency. Offering a high level of integration, they are suitable for a wide range of applications in consumer, industrial and appliance domains and ready for the Internet of Things (IoT) solutions. Part number Description Package STM32G031C4T6 32-Bit ARM Cortex-M0+ MCU 16 Kbytes of Flash memory LQFP-48 STM32G031C4U6 32-Bit ARM Cortex-M0+ MCU 16 Kbytes of Flash memory UFQFPN-48 STM32G031C6T6 32-Bit ARM Cortex-M0+ MCU 16 Kbytes of Flash memory LQFP-48 STM32G031C6U6 32-Bit ARM Cortex-M0+ MCU 16 Kbytes of Flash memory UFQFPN-48 STM32G031C8T6 32-Bit ARM Cortex-M0+ MCU 16 Kbytes of Flash memory LQFP-48 STM32G031C8T7 32-Bit ARM Cortex-M0+ MCU 16 Kbytes of Flash memory LQFP-48 STM32G031C8U6 32-Bit ARM Cortex-M0+ MCU 16 Kbytes of Flash memory UFQFPN-48 STM32G031C8U6TR 32-Bit ARM Cortex-M0+ M...

Arduino ASX00003 MKR Motor Carrier Board

The MKR Motor Carrier is an MKR add-on board designed to control servo, DC, and stepper motors. The Carrier can also be used to connect other actuators and sensors via a series of 3-pin male headers. for more details please click this link https://store.arduino.cc/usa/mkr-motor-carrier ASX00003 MKR Motor Carrier The summary of features is shown below: 1. Compatible with all the boards in the MKR family 2. Four servo motor outputs 3. Four DC motor outputs (two high performance + two standard performance) 4. Sensing of current feedback for the high-performance motors 5. Two inputs for encoder sensors 6. Four inputs for analog sensors (3-pin compatible) 7. Possibility to read the status of the batteries 8. ON...

New Silicons and Electronics

Search This Blog