Skip to main content

Infineon New F3L400R10W3S7_B11 Easy 3B package

Infineon has extended its Easy family to include a new package: Easy 3B. Together with the other Easy 1B and 2B packages, this comprises the broadest power module portfolio at 12 mm height without base plate. Easy 3B is the ideal platform to extend current inverter designs to achieve higher power without changing much on the mechanical side. At the same time, the new package inherits many of the advantages of the family portfolio such as the flexible pin-grid system, which is very important for customizing. The first module with the new package design is a 400 A, 3-level ANPC (advanced neutral point clamping) device aiming at 1500 V solar inverter applications. The Easy 3B package will be showcased at PCIM 2019.

Easy 3B
Easy3B
In utility-scale solar installations, the 1500 V inverter is becoming more and more popular. Total worldwide shipments for this voltage class was 32.7 GW of AC power (output power of solar power plant) in 2018. The expected compound annual growth rate of this voltage class for the next five years is expected to be at 20,6 percent*. In order to address this growing market, this new product is equipped with the latest IGBT technology with a blocking voltage of 950 V. The footprint of the Easy 3B package is 110 mm x 62 mm making it 2,5 times larger than the Easy 2B. This module enables a highly efficient inverter design with a power-rating of up to 150 kW and an industry leading power-density of more than 500 W/Liter.

Infineon is planning to develop a full Easy 3B portfolio with TRENCHSTOP™ IGBT7 to address the industrial drives market. This will extend the current Easy module based drive portfolio to include higher current ratings. As this is also the ideal platform for emerging applications like EV chargers and energy storage systems, Infineon will develop products for these applications as well. Since charging and storage rely on high efficiency, the Easy 3B package will also be introduced with Infineon’s CoolSiC™ MOSFETs utilizing the latest silicon carbide chip technology.

Availability

Easy 3B is ready for high-volume production. F3L400R10W3S7_B11 is available starting June 2019, samples can be ordered now. More information is available at www.infineon.com/easy.

https://www.infineon.com/cms/en/about-infineon/press/market-news/2019/INFIPC201904-057.html

Comments

Popular posts from this blog

Nordic Thingy: 91 Multi-sensor cellular IoT Prototyping kit

The Nordic Thingy:91 is an easy-to-use battery-operated prototyping platform for cellular IoT using LTE-M, NB-IoT and GPS. It is ideal for creating Proof-of-Concept (PoC), demos and initial prototypes in your cIoT development phase.
NRF6943  Nordic Thingy:91 is as Multi-sensor cellular IoT prototyping kit supporting LTE-M, NB-IoT, GPS and Bluetooth Low Energy.
The Nordic Thingy:91 is the ideal way to kickstart your cellular IoT project using the nRF9160 SiP. Thingy:91 is equipped with a broad collection of diverse sensors and interfaces that make it highly adaptable to rapid prototyping and getting your proof of concept off the ground in no time at all.

        Key features
•Battery-operated prototyping platform for the nRf9160 SiP
•700-900 MHz + 1710-2200 MHz LTE band support
•Certifications: CE, FCC
•nRF52840 multiprotocol SoC on board
•LTE-M/NB-IoT/GPS antennas
•Nano/4FF SIM card slot
•User-programmable button and RGB LEDs
•Environmental sensor for temp, humidity, air quality and a…

ON Semi RSL10-SOLARSENS-GEVK, RSL10 Solar Cell Multi-Sensor Platform

ON Semiconductor driving energy efficient innovations, continues to enable battery-less and maintenance-free IoT with the introduction of its RSL10 Multi-Sensor Platform powered solely with a solar cell. This complete solution supports the development of IoT sensors using continuous solar energy harvesting to gather and communicate data through Bluetooth® Low Energy, without the need for batteries or other forms of non-renewable energy.
The RSL10 Solar Cell Multi-Sensor platform is a complete, low-cost solution for developing self-powered sensor nodes using harvested solar energy. Based on the RSL10 SIP- the industry's lowest power Bluetooth ® 5 radio, the RSL10 Solar Cell Multi-Sensor platform supports continuous Bluetooth Low Energy transmission of sensor information without requiring any batteries. The fully-integrated platform features multiple smart sensors, an ultra-low quiescent current LDO regulator (NCP170), and a 2-port connector for the provided solar cell (FlexRB-25-70…

Arduino ASX00003 MKR Motor Carrier Board

The MKR Motor Carrier is an MKR add-on board designed to control servo, DC, and stepper motors. The Carrier can also be used to connect other actuators and sensors via a series of 3-pin male headers.

for more details please click this link  https://store.arduino.cc/usa/mkr-motor-carrier


The summary of features is shown below:

1.Compatible with all the boards in the MKR family 2.Four servo motor outputs 3.Four DC motor outputs (two high performance + two standard performance) 4.Sensing of current feedback for the high-performance motors 5.Two inputs for encoder sensors 6.Four inputs for analog sensors (3-pin compatible) 7.Possibility to read the status of the batteries 8.ON-OFF switch with Power ON LED 9.LiPo battery connector (2S or 3S compatible) and power terminal block for alternative power source 10.LEDs to visually indicate the direction of the rotation of the DC motors.
Source https://store.arduino.cc/usa/mkr-motor-carrier