ON Semi RSL10 Sensor Development Kit, RSL10-SENSE-GEVK, RSL10-SENSE-DB-GEVK

The RSL10 Sensor Development Kit combines cutting-edge sensor technology, Bluetooth 5 data rates, and optimized power consumption to provide a ready-to-use prototyping platform for developing IoT applications with lasting battery life. Built around the RSL10 SIP, the development kit is pre-loaded with a custom service protocol that requires no additional programming.

There are two variants of the RSL10 Sensor Kit:

RSL10-SENSE-GEVK (base version)

RSL10-SENSE-DB-GEVK (debug version)

Both variants ship with a CR2032 coin cell battery and a flexible NFC Antenna. On the debug (-DB) variant, the 10-pin debug header is populated and a Segger J-Link LITE CortexM debugger that connects to this header is also shipped.

https://www.onsemi.com/PowerSolutions/evalBoard.do?id=RSL10-SENSE-GEVK

User manual : https://www.onsemi.com/pub/Collateral/EVBUM2614-D.PDF

Comments

Microchip New SAMV71Q21RT, SAMRH71 Radiation-Tolerant and Radiation-Hardened Arm® MCU

Microchip introduced the space industry’s first Arm®-based microcontrollers (MCUs) that combine the low-cost and large ecosystem benefits of Commercial Off-the-Shelf (COTS) technology with space-qualified versions that have scalable levels of radiation performance. Based on the automotive-qualified SAMV71, the SAMV71Q21RT radiation-tolerant and SAMRH71 radiation-hardened MCUs implement the widely deployed Arm® Cortex®-M7 System on Chip (SoC), enabling more integration, cost reduction and higher performance in space systems. SAMV71Q21RT is the radiation tolerant version of the popular Microchip SAMV71Q21. This space-qualified version of the product adds: Ceramic & hermetic package, extended temperature range -40C to 125C, extended qualification flow according to QML-V or QML-Q space grade flow. Radiation performance for the SAMV71Q21RT: SEL LET > 60 MeV.cm2/mg (at 125C), and TID up to 20 Krad (Si). SAMRH71 is the Radiation-Hardened-By-Design (RHBD) version of the popular M

Arduino ASX00003 MKR Motor Carrier Board

The MKR Motor Carrier is an MKR add-on board designed to control servo, DC, and stepper motors. The Carrier can also be used to connect other actuators and sensors via a series of 3-pin male headers. for more details please click this link https://store.arduino.cc/usa/mkr-motor-carrier ASX00003 MKR Motor Carrier The summary of features is shown below: 1. Compatible with all the boards in the MKR family 2. Four servo motor outputs 3. Four DC motor outputs (two high performance + two standard performance) 4. Sensing of current feedback for the high-performance motors 5. Two inputs for encoder sensors 6. Four inputs for analog sensors (3-pin compatible) 7. Possibility to read the status of the batteries 8. ON-OFF switch with Power ON LED 9. LiPo battery connector (2S or 3S compatible) and power terminal block for alternative power source 10. LEDs to visually indicate the direction of the rotation of t

STM32G031 32-Bit ARM Cortex-M0+ Microcontrollers from STMicroelectronics

The STM32G031x4/x6/x8 mainstream microcontrollers are based on high-performance Arm® Cortex®-M0+ 32-bit RISC core operating at up to 64 MHz frequency. Offering a high level of integration, they are suitable for a wide range of applications in consumer, industrial and appliance domains and ready for the Internet of Things (IoT) solutions. Part number Description Package STM32G031C4T6 32-Bit ARM Cortex-M0+ MCU 16 Kbytes of Flash memory LQFP-48 STM32G031C4U6 32-Bit ARM Cortex-M0+ MCU 16 Kbytes of Flash memory UFQFPN-48 STM32G031C6T6 32-Bit ARM Cortex-M0+ MCU 16 Kbytes of Flash memory LQFP-48 STM32G031C6U6 32-Bit ARM Cortex-M0+ MCU 16 Kbytes of Flash memory UFQFPN-48 STM32G031C8T6 32-Bit ARM Cortex-M0+ MCU 16 Kbytes of Flash memory LQFP-48 STM32G031C8T7 32-Bit ARM Cortex-M0+ MCU 16 Kbytes of Flash memory LQFP-48 STM32G031C8U6 32-Bit ARM Cortex-M0+ MCU 16 Kbytes of Flash memory UFQFPN-48 STM32G031C8U6TR 32-Bit ARM Cortex-M0+ MCU 16 Kbytes of Flash memory UFQFPN-48 STM3

New Silicons and Electronics

Search This Blog