New Silicons and Electronics

Infineon new CoolSiC™ 1200V Silicon Carbide Trench MOSFETs IMW120R030M1HXKSA1 1200V 56A SiC Trench MOSFET TO247-3 IMW120R045M1XKSA1 1200V 52A SiC Trench MOSFET TO247-3 IMW120R060M1HXKSA1 1200V 36A SiC Trench MOSFET TO247-3 IMW120R090M1HXKSA1 1200V 26A SiC Trench MOSFET TO247-3 IMW120R140M1HXKSA1 1200V 19A SiC Trench MOSFET TO247-3 IMW120R220M1HXKSA1 1200V 13A SiC Trench MOSFET TO247-3 IMW120R350M1HXKSA1 1200V 4.7A SiC Trench MOSFET TO247-3 IMZ120R030M1HXKSA1 1200V 56A SiC Trench MOSFET TO247-4 IMW120R045M1XKSA1 1200V 52A SiC Trench MOSFET TO247-3 IMZ120R060M1HXKSA1 1200V 36A SiC Trench MOSFET TO247-4 IMZ120R090M1HXKSA1 1200V 26A SiC Trench MOSFET TO247-4 IMZ120R140M1HXKSA1 1200V 19A SiC Trench MOSFET TO247-4 IMZ120R220M1HXKSA1" 1200V 13A SiC Trench MOSFET TO247-4 IMZ120R350M1HXKSA1 1200V 4.7A SiC Trench MOSFET TO247-4 Datasheets https://www.infineon.com/dgdl/Infineon-IMW120R030M1H-DS-v01_01-EN.pdf?fileId=5546d46269e1c01...

VLMU35CL is a ceramic based low power UVC LED with quartz window for long life time. The package size is 3.5 mm x 3.5 mm x 1.2 mm and the radiant power typically 3.2 mW at 20 mA in a wavelength range of 265 nm to 285 nm. Ceramic SMT package with quartz window Dimension (L x W x H) in mm: 3.5 x 3.5 x 1.2 Forward current: up to 70 mA https://www.vishay.com/docs/80009/vlmu35clxx-280-120.pdf https://www.vishay.com/product?docid=80009

The FDA903U is a single bridge class D amplifier, designed in the most advanced BCD technology, intended for any automotive audio application (car radio, telematics and e-call, noise and tone generators, etc). AEC-Q100 qualified Integrated 108 dB D/A conversion I2S and TDM digital input (4/8/16CH TDM) Input sampling frequency: 44.1 kHz, 48 kHz, 96 kHz, 192 kHz Full I2C bus driving (3.3/1.8 V) FDA903U-KBT 45W Class-D Audio Power Amplifiers PowerSSO-36 FDA903U-KBX 45W Class-D Audio Power Amplifiers PowerSSO-36 https://www.st.com/resource/en/datasheet/fda903u.pdf https://www.st.com/en/automotive-infotainment-and-telematics/fda903u.html#overview

The FDA803U is a single bridge class D amplifier, designed in the most advanced BCD technology, intended for any automotive audio application (car radio, telematics and e-call, noise and tone generators, etc) AEC-Q100 qualified I2S and TDM digital input (4/8/16CH TDM) FDA803U-KBT Class-D Audio Power Amplifiers PowerSSO-36 FDA803U-KBX Class-D Audio Power Amplifiers PowerSSO-36 https://www.st.com/resource/en/datasheet/fda803u.pdf

L9918 is an alternator voltage regulator equipped with LIN protocol interface. The device is intended to be used in automotive application for 12 V systems. The presence of NVM cells for device parameters programmability makes it suitable for a wide range of charging application. AEC-Q100 qualified Closed loop voltage control Regulated voltage with thermal compensation function High side excitation driver with internal freewheeling circuit Load response control (LRC) and Return LRC Self-start activation by phase signal Current limitation and overcurrent protection Thermal protection Physical Layer compliant with LIN 2.2A spec. Data Link Layer compliant with LIN 1.3, 2.1, 2.2 and 2.2A specification 13 sets of LIN frames selectable Configurable parameters (see NVM parameter table A1) Configurable for 5, 6, 7, 8 or 9 pole pair alternator Compliant to VDA LIN-Generator-Regulator speci...

Built-in Speed Control, 3 Hall Sensors Three-Phase Brushless Motor Driver BM62380MUV is sine wave driver IC for three-phase brushless motor driver with 40 V power supply voltage rating and 2.0 A output current rating. It detects the rotor position by 3 Hall sensors. In addition, it has a speed feedback control function, and controls output PWM Duty by adjusting the rotational frequency characteristics for the input PWM signal and the rotational frequency affected from motor. Operating Supply Voltage Range: 8 V to 28 V Output current rating: 2.0 A Output ON Resistance (top & bottom total): 0.6 Ω (Typ) Output PWM Frequency: 40 kHz (Typ) Standby Current: 0.6 mA (Typ) Operating Temperature Range: -40 °C to +85 °C Package  VQFN040V6060 6.00 mm x 6.00 mm x 1.00 mm https://www.rohm.com/datasheet/BM62380MUV/bm62380muv-e

3 Hall Sensors Three-Phase Brushless Motor Pre-Driver BM64300MUV is the pre-driver IC of sine wave drive for three-phase brushless motor driver that supports 48 V power supply controlling the motor driver constructed in external FETs. It detects a rotor position by 3 Hall sensors. In addition, silent and low vibration operations are implemented by making the output current a sine waveform. Operating Supply Voltage Range : 28 V to 63 V Output PWM Frequency : 40 kHz (Typ) Standby Current : 1.2 mA (Typ) Operating Temperature Range : -40 °C to +105 °C Package VQFN032V5050 5.00 mm x 5.00 mm x 1.00 mm https://www.rohm.com/datasheet/BM64300MUV/bm64300muv-e