Maxim MAX98390EWX+T Class-D Amplifier WLP-36

The MAX98390 is a high-efficiency mono Class-D DSM smart amplifier that features an integrated boost converter, integrated Dynamic Speaker ManagementTM, and FET scaling for higher-efficiency at low output power.

2.65V to 5.5V Battery Voltage Range
Low Distortion—0.01% THD+N
Output Power at 1% THD+N
5.1W into 8Ω, VVBAT = 4.3V
5.1W into 4Ω, VVBAT = 4.3V
Output Power at 10% THD+N
6.2W into 8Ω, VVBAT = 4.3V
6.2W into 4Ω, VVBAT = 4.3V
I 2S/16-Channel TDM and I2C Interfaces
0.4mm pitch, 36-bump wafer-level package

MAX98390 Boosted Class-D Amplifier with Integrated Dynamic Speaker Management.
MAX98390EVSYS# Evaluation Board

Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX98390.pdf
https://datasheets.maximintegrated.com/en/ds/MAX98390EVSYS.pdf

Comments

Microchip New SAMV71Q21RT, SAMRH71 Radiation-Tolerant and Radiation-Hardened Arm® MCU

Microchip introduced the space industry’s first Arm®-based microcontrollers (MCUs) that combine the low-cost and large ecosystem benefits of Commercial Off-the-Shelf (COTS) technology with space-qualified versions that have scalable levels of radiation performance. Based on the automotive-qualified SAMV71, the SAMV71Q21RT radiation-tolerant and SAMRH71 radiation-hardened MCUs implement the widely deployed Arm® Cortex®-M7 System on Chip (SoC), enabling more integration, cost reduction and higher performance in space systems. SAMV71Q21RT is the radiation tolerant version of the popular Microchip SAMV71Q21. This space-qualified version of the product adds: Ceramic & hermetic package, extended temperature range -40C to 125C, extended qualification flow according to QML-V or QML-Q space grade flow. Radiation performance for the SAMV71Q21RT: SEL LET > 60 MeV.cm2/mg (at 125C), and TID up to 20 Krad (Si). SAMRH71 is the Radiation-Hardened-By-Design (RHBD) version of the popular M

Arduino ASX00003 MKR Motor Carrier Board

The MKR Motor Carrier is an MKR add-on board designed to control servo, DC, and stepper motors. The Carrier can also be used to connect other actuators and sensors via a series of 3-pin male headers. for more details please click this link https://store.arduino.cc/usa/mkr-motor-carrier ASX00003 MKR Motor Carrier The summary of features is shown below: 1. Compatible with all the boards in the MKR family 2. Four servo motor outputs 3. Four DC motor outputs (two high performance + two standard performance) 4. Sensing of current feedback for the high-performance motors 5. Two inputs for encoder sensors 6. Four inputs for analog sensors (3-pin compatible) 7. Possibility to read the status of the batteries 8. ON-OFF switch with Power ON LED 9. LiPo battery connector (2S or 3S compatible) and power terminal block for alternative power source 10. LEDs to visually indicate the direction of the rotation of t

IDT New SPD Hub IC for DDR5 Server Memory Modules

IDT introduced the industry’s first integrated Serial Presence Detect (SPD), temperature sensor and control plane hub component (referred to as “SPD Hub”) developed for DDR5-based Dual In-Line Memory Modules (DIMM). The IDT® SPD Hub is designed to provide a space and power efficient solution that enables control plane operation at significantly higher speeds than previous system management buses with enhanced reliability. DDR5 memory is projected to double the bandwidth of DDR4, and as with previous generations of DDR memory, IDT’s devices are leading the market in performance and reliability. IDT’s DDR5 PMIC enables the next generation of server DIMM solutions to efficiently scale to greater performance, density and reliability while reducing overall system power. IDT’s SPD Hub significantly increases the system management bus performance by eliminating the bottlenecks of traditional system management buses. The DDR5 RCD, PMIC, SPD Hub and TS devices are used in RDIMM, LRDIM

New Silicons and Electronics

Search This Blog